Soze's GMADE GS02 BOM Build
 

So I'm joining the party of BOM build threads. Since the other threads show more of the custom mods, etc. I'll post more detailed step by steps for the stock build for those of you that want to see that, until I fully finish and then venture off into upgrading parts and modifying.

Here's what we're building.

https://farm2.staticflickr.com/1867/...92e2b293_b.jpg

Follow this build on YouTube - https://www.youtube.com/playlist?lis...EJELNBdAKseKe1

Most links are to items on eBay. As an eBay Partner, I may be compensated if you make a purchase.

Kit:

GMADE GS02 BOM (available on eBay)

Parts:

Yeah Racing Aluminum 540 Motor Spacer Heatsink (available on eBay)
Boom Racing 25T Alloy Servo Horn
Team Associated #5422 30wt Oil (available on eBay)
X-Rings from Traxxas 2362 Rebuild Kit (ebay)
GS02 Hardened universal shaft set (J30035) (ebay)
GA44 Heavy duty diff locker (GM30112) (ebay)
BOM exterior detail parts tree (Black) [GM60120] (ebay)
BOM mirror L/R [GM30128] (ebay)
BOM cage hinge (Titanium gray) [GM30137] (ebay)
Crawler Innovations 1.9 XL Deuces Wild Single Stage foams (available on eBay)
Pro-Line 1.9 Super Swamper TSL XL G8 Tires (available on eBay)
Injora 1.9 Beadlock Wheels (available on eBay)
Axial SCX10 Wheel Wells (AX31150) (ebay)
GS02 aluminum shock brace GM30130 (ebay) (currently unused)
GS02 stainless steel front under guard GM30150 (ebay)
GS02 cantilever sway bar GM30143 (ebay)
GMADE Aluminum 12mm Wheel Hub (4) (8mm Thick) GM30131 (ebay)
Gmade - Rear Link Kit, 324mm Wheelbase GM30133, for GS02 BOM (ebay) (currently unused)
Gmade - Rear Link Kit, 336mm Wheelbase GM30134, for GS02 BOM (ebay) (currently unused)
Gmade Cantilever Arm Set, for GS02 BOM (Titanium Gray) GMA30139 (ebay)
GMADE Komodo Roof Rack & Accessories (ebay) (currently unused)
SSD Pro SCX10 II Aluminum Knuckles SSD00144 (available on eBay)
SSD Brass Weights (Black version) SSD00140 (available on eBay)



Electronics:

Turnigy MG959 V2 Servo (available on eBay)
Yeah Racing Hackmoto 550 35T Brushed Motor (available on eBay)
FlySky R6B 2.4GHz 6-Channel Receiver (available on eBay)
FlySky GT-3C 2.4 GHz Radio (available on eBay)

Tools:

Versachem Brake Caliper Grease (eBay)
Noleen SF3 Grease (available on eBay)
Associated 1656 FT 1/4 in Driver Handle (eBay)
Tamiya Side Cutter (eBay)
DEWALT DCF610S2R 12V MAX Cordless Lithium-Ion 1/4 in. Hex Chuck Screwdriver Kit (eBay)
MIP Metric Speed Tip Set MIP9512 (eBay)
Bob Smith Industries Blue Thread Locker (eBay)
ProTek RC Shock Pliers (available on eBay)
Molotow Liquid Chrome Marker Set - 1mm, 2mm and 4mm (eBay)
Tamiya PS-63 Bright Gunmetal (ebay)
Duratrax Gunmetal (ebay)

Re: Soze's GMADE GS02 BOM Build
 

Kool...sub'd. Enjoy the build.

Re: Soze's GMADE GS02 BOM Build
 

Steps 1-13: Axles

Let's begin

https://farm2.staticflickr.com/1862/...2e2407e2_b.jpg


Parts needed for this step

https://farm2.staticflickr.com/1842/...3b0bdd3d_b.jpg

https://farm2.staticflickr.com/1847/...481385f8_b.jpg


Metal balls given to the first batch of BOMs

https://farm2.staticflickr.com/1899/...68e4050b_b.jpg


The well labeled hardware bags. Wish they would've went a step further and grouped the hardware by steps as well.

https://farm2.staticflickr.com/1891/...bb80fca7_b.jpg

https://farm2.staticflickr.com/1849/...9c9ee625_b.jpg


Ready to begin

https://farm2.staticflickr.com/1861/...06c248b3_b.jpg


Diff gears finished

https://farm2.staticflickr.com/1890/...a0388615_b.jpg


Pinion Gear side of the axle

https://farm2.staticflickr.com/1900/...05805fdf_b.jpg

https://farm2.staticflickr.com/1886/...0a3024c2_b.jpg

https://farm2.staticflickr.com/1890/...68844a9b_b.jpg


The other side of the axle

https://farm2.staticflickr.com/1869/...13708f1d_b.jpg


All greased up

https://farm2.staticflickr.com/1881/...6d6cfc0e_b.jpg


C-Hubs going on

https://farm2.staticflickr.com/1868/...5da09715_b.jpg

https://farm2.staticflickr.com/1877/...e3ebf3d3_b.jpg


Front CVDs

https://farm2.staticflickr.com/1876/...24d67c9f_b.jpg

https://farm2.staticflickr.com/1851/...5916bfeb_b.jpg


Knuckles

https://farm2.staticflickr.com/1858/...62e7836a_b.jpg

https://farm2.staticflickr.com/1859/...74f2b0ce_b.jpg


Link mounts

https://farm2.staticflickr.com/1862/...f8284111_b.jpg

https://farm2.staticflickr.com/1890/...6bb2411c_b.jpg


Time for the rear axle

https://farm2.staticflickr.com/1880/...94d79aeb_b.jpg

https://farm2.staticflickr.com/1848/...c8f7fc4f_b.jpg

https://farm2.staticflickr.com/1881/...eb290590_b.jpg

https://farm2.staticflickr.com/1881/...1975da68_b.jpg

https://farm2.staticflickr.com/1893/...827dc8bd_b.jpg

https://farm2.staticflickr.com/1866/...874a33cd_b.jpg

https://farm2.staticflickr.com/1888/...ae5f496c_b.jpg

https://farm2.staticflickr.com/1852/...e6890e94_b.jpg


Front and rear axles all done

https://farm2.staticflickr.com/1886/...0c830ff1_b.jpg

Re: Soze's GMADE GS02 BOM Build
 

Welcome to the BOM club! You have much more patience for pics than I do. :)

How are your axles? Any crunch going on there? Just curious.

Re: Soze's GMADE GS02 BOM Build
 

Yes on both axles. It's just one spot in the rotation though, not throughout. I wonder where in the assembly it's uneven causing that crunch.

Due to the crunch only happening in one section of a rotation, I'm inclined to think it's the assembling of the diff gear. Either I didn't put together that assembly evenly (which I did double-check), or the plastic housing on the diff assembly is molded unevenly.

I wonder if the upgraded diff locker would help with the crunch.

Re: Soze's GMADE GS02 BOM Build
 

I know some of the parts are compatible with Axial SCX10 II parts and the gears look similar to the OG SCX10 so...do Axial gears drop into these axles? That might narrow down the crunching.

Re: Soze's GMADE GS02 BOM Build
 

Don't have an OG SCX10, but I think those gears are larger? The pumpkin of the BOM is about the same size as the SCX10.2, so I don't think the OG SCX10 gears are the same size.

Re: Soze's GMADE GS02 BOM Build
 

Steps 14-19 + 25: Transmission

We start with the B-bag.

https://farm2.staticflickr.com/1863/...55713098_b.jpg


Step 14 parts

https://farm2.staticflickr.com/1896/...d7ba95af_b.jpg


Assembled gears

https://farm2.staticflickr.com/1844/...b0df5e90_b.jpg


Parts for the next steps

https://farm2.staticflickr.com/1881/...c9cf113f_b.jpg


Assembled and greased up

https://farm2.staticflickr.com/1882/...32d53865_b.jpg


Spur gear goes on. They use stacked conical washers instead of a spring for the slipper. Directions say to fully tighten the lock nut, and then loosen by about a quarter turn. Here's how it looks.

https://farm2.staticflickr.com/1864/...4d63b4c3_b.jpg

https://farm2.staticflickr.com/1899/...15f9390b_b.jpg


Parts for the next step.. More e-clips yay...

https://farm2.staticflickr.com/1893/...5f06d229_b.jpg


Assembled gears...

https://farm2.staticflickr.com/1897/...28a283f4_b.jpg


Skipping to step 25 like new2rocks did.

https://farm2.staticflickr.com/1874/...c93cc4b8_b.jpg


Greased up. I wonder how the 2-speed option setup would look in this spot. That empty space has to be for something.

https://farm2.staticflickr.com/1875/...9eb30578_b.jpg


Transmission complete.

https://farm2.staticflickr.com/1884/...2035a753_b.jpg

https://farm2.staticflickr.com/1887/...a3ed38c7_b.jpg

Re: Soze's GMADE GS02 BOM Build
 

Make sure you snap that sucker down tight before the clamps go on...it's tricky. ;-)

Re: Soze's GMADE GS02 BOM Build
 

Yep, sure did. This transmissions spins pretty smooth. Kind of surprised at how smooth actually. If I could only get the axles to be just as smooth.

Re: Soze's GMADE GS02 BOM Build
 

Agreed!

I have a link the perfect size for mounting between the front shock towers for stability, but I hate to restrict my battery capacity that much....

Re: Soze's GMADE GS02 BOM Build
 

I plan to address that as well once I get it built up in stock form. It'll give me time to think of solutions.

Re: Soze's GMADE GS02 BOM Build
 

Making popcorn then.

Re: Soze's GMADE GS02 BOM Build
 

Steps 20-23: Links

This is going to be a pretty short step/post.


Bag of parts for these steps

https://farm2.staticflickr.com/1853/...75da462b_b.jpg


Starting the front lower links

https://farm2.staticflickr.com/1867/...f03f8f79_b.jpg

https://farm2.staticflickr.com/1899/...125f314b_b.jpg


Front upper link

https://farm2.staticflickr.com/1882/...10484550_b.jpg

https://farm2.staticflickr.com/1862/...76e77c84_b.jpg


Rear lower links

https://farm2.staticflickr.com/1844/...d2fde57e_b.jpg

https://farm2.staticflickr.com/1894/...87667824_b.jpg


Rear upper links

https://farm2.staticflickr.com/1874/...9b88c817_b.jpg

https://farm2.staticflickr.com/1842/...ffaefb3e_b.jpg

Re: Soze's GMADE GS02 BOM Build
 

Steps 24 + 26-29: Chassis

Time to move onto the chassis. For this step, I also used the following non-kit items...

Turnigy MG959 V2 Servo (available on eBay)
Yeah Racing Hackmoto 550 35T Brushed Motor (available on eBay)
Yeah Racing Aluminum 540 Motor Spacer Heatsink (available on eBay)
Boom Racing 25T Alloy Servo Horn


These are the parts needed for the battery tray

https://farm2.staticflickr.com/1881/...267e6158_b.jpg


I'll be using the Turnigy MG959 V2 Servo and a Boom Racing 25T Servo Horn

https://farm2.staticflickr.com/1842/...12e4cc3b_b.jpg

https://farm2.staticflickr.com/1887/...b4e4e99f_b.jpg

https://farm2.staticflickr.com/1872/...0e3b2423_b.jpg


Servo mounted onto the battery tray/servo mount assembly

https://farm2.staticflickr.com/1869/...64f353e9_b.jpg

https://farm2.staticflickr.com/1885/...c4f2c785_b.jpg


These are the parts needed to start putting the frame rails together

https://farm2.staticflickr.com/1864/...6e797d5b_b.jpg


It's starting to look like a chassis!

https://farm2.staticflickr.com/1886/...976d9f4b_b.jpg


That under-frame receiver box that everybody has been putting weights in... I might do the same.

https://farm2.staticflickr.com/1885/...dee69106_b.jpg

https://farm2.staticflickr.com/1869/...d8d52677_b.jpg


Time to get those links on

https://farm2.staticflickr.com/1857/...c8c9956d_b.jpg


Links mounted

https://farm2.staticflickr.com/1860/...ed814bce_b.jpg


Parts for mounting the motor

https://farm2.staticflickr.com/1870/...08b91bcf_b.jpg


I'll be using a Yeah Racing Hackmoto 550 35T Brushed Motor

https://farm2.staticflickr.com/1861/...c08870e3_b.jpg


So... I ran into a snag with this motor. The motor shaft is longer than normal, and I couldn't put the transmission cover on without hitting the motor shaft. So I had to get Yeah Racing Aluminum 540 Motor Spacer Heatsink

https://farm2.staticflickr.com/1909/...ebd1e492_b.jpg


With the spacer installed, I was now able to have the motor shaft clear.

https://farm2.staticflickr.com/1934/...fcf98b32_b.jpg

https://farm2.staticflickr.com/1903/...1898d533_b.jpg

https://farm2.staticflickr.com/1924/...7eaa2720_b.jpg


One thing I am concerned about is the pinion/spur mesh. It's tighter than I would like, and since the motor mount uses pre-set mounting holes, there's really no fine adjustment available. I will revisit this area later after I complete my build to see if there is a way I can make the pinion/spur mesh more to my liking.

Re: Soze's GMADE GS02 BOM Build
 

Nice write up, especially for the parts you are using in your build. I am interested in how you like the Hackmoto 35T.
Keep the good work going "thumbsup"

Re: Soze's GMADE GS02 BOM Build
 

Cruising right along there, soze!

Strangely, my pinion/spur mesh was almost exactly where I would've put it had there been more adjustment possible. It does seem sort of a strange arrangement as it doesn't take manufacturing tolerances of gears/spurs into account or allow for variance compensation. Not a big fan.

Great pics & write-up. "thumbsup"

Re: Soze's GMADE GS02 BOM Build
 

I like that the battery tray is really low, but there seems to be a lot of extra stuff on the bottom of this truck to get snagged out in the woods. It'll be interesting to see how that plays out.

Re: Soze's GMADE GS02 BOM Build
 

Dude...GMADE GS02 BOM Build Series - Part 5 - Shocks...1:19...I heard "Team Associated penis slime", and now that's all I can hear. :lmao::lmao:

Re: Soze's GMADE GS02 BOM Build
 

Lol... you need your ears checked. "GREEN" slime.