RCCrawler Forums

JaoQuinz · 07-26-2021, 11:34 PM

Hi,

I am looking to climb as steep a possible.

I weighed my GOM and it came in at 3.5kg all in. Each plastic wheel with Hyrax tyre and memory foam came in at 175gms. I searched the forums and all say less rotational mass is best, unsprung weight good etc. It does well with the 540 23T brushed motor in stock form so far on a 48 degree incline.

I wonder what you guys run on your GOMs. 3.5kgs (7.7lbs) seems average, wonder how much wheel weights can I run before it becomes detrimental to the drivetrain. And can't seem to find any aftermarket axle weights short of changing everything to the junfac aluminum knuckles.

What are my options, or is GOM's weight distribution perfect and I shouldn't mess with it?

cul8tr · 02-27-2023, 04:30 AM

Gmade buffalo
For a lil extra weight I went with a 2.2" wheel 1' wide. With 1.9" tires mounted.

themountain · 02-27-2023, 06:07 AM

raise the upper links in the rear for climbing

cul8tr · 05-25-2023, 04:23 AM

I added SCX10.2 heavy str knuckles and brass from the 10.2 to the rear axle. Stock shock springs I cut 1 coil off and mounted them to the lower link location.

07-26-2021, 11:34 PM	#1
JaoQuinz Newbie Join Date: Jul 2021 Location: Happy Valley Posts: 5	How much weight added to GOM? Hi, I am looking to climb as steep a possible. I weighed my GOM and it came in at 3.5kg all in. Each plastic wheel with Hyrax tyre and memory foam came in at 175gms. I searched the forums and all say less rotational mass is best, unsprung weight good etc. It does well with the 540 23T brushed motor in stock form so far on a 48 degree incline. I wonder what you guys run on your GOMs. 3.5kgs (7.7lbs) seems average, wonder how much wheel weights can I run before it becomes detrimental to the drivetrain. And can't seem to find any aftermarket axle weights short of changing everything to the junfac aluminum knuckles. What are my options, or is GOM's weight distribution perfect and I shouldn't mess with it?

02-27-2023, 04:30 AM	#2
cul8tr Quarry Creeper Join Date: Nov 2009 Location: Hickory,NC Posts: 337	Re: How much weight added to GOM? Gmade buffalo For a lil extra weight I went with a 2.2" wheel 1' wide. With 1.9" tires mounted.

02-27-2023, 06:07 AM	#3
themountain Rock Crawler Join Date: Mar 2019 Location: Terrassa/Barcelona Posts: 937	Re: How much weight added to GOM? raise the upper links in the rear for climbing

05-25-2023, 04:23 AM	#4
cul8tr Quarry Creeper Join Date: Nov 2009 Location: Hickory,NC Posts: 337	Re: How much weight added to GOM? I added SCX10.2 heavy str knuckles and brass from the 10.2 to the rear axle. Stock shock springs I cut 1 coil off and mounted them to the lower link location.

How much weight added to GOM? - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
gom vrs gom plus kit?	twisted	G-Made Crawlers	5	01-04-2019 08:30 AM
wheel weight vs knuckle or axle weight vs creative weight distribution	tech712	Axial SCX-10	16	11-04-2014 01:04 PM
Added weight	Red Cat Crawler	Redcat Crawlers	2	02-15-2013 10:16 AM
Ok I added my new shocks and some weight!	Mighty1	Axial AX-10 Scorpion	14	12-14-2009 01:08 PM
Added weight and now worse than before!	jc052685	Tires and Wheels	52	05-25-2008 07:31 AM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links

RCCrawler Forums

Thread: How much weight added to GOM?