★Official sawback electronics thread★

[crazy nick]

I see this for other vehicles , and being this is a kit I figured I would start an official one. So what motor, esc's, servos etc......are you running?

[raceeng18]

Re: What are you guys powering your Sawbacks with?
Changed my pinion to Robinson Racing for the quiet. Futaba 3 channel, 35T Novak Rock Star on 3s with a BRXL.

[JatoTheRipper]

I'm currently running a sensored brushless setup at the moment. It's an awesome system for the money! The servo is also good for the money.

ESC: Hobby King 35A Sensored/Sensorless Car ESC
Motor: Turnigy TrackStar 17.5T Sensored Brushless Motor 2270KV
Servo: Solar D772

[John82601]

I'm running stuff I had laying around and it's working great.

Traxxas XL-5 esc
Great Planes T-600 motor w/ Robinson 9t pinion (MUCH quieter)
HD-1201MG servo (200'ish oz/in torque)
3s 3000mah lipo

[crazy nick]

I m gonna run

Cc sv2
ccbec
Team Brood 35t intensity
Savox wp 1210 sg
2s trinity lipos

[JatoTheRipper]

I'm not changing the pinion because I like the noise!

I am thinking about going brushed so I can run through water. I ordered the items below from HobbyKing. Now I need to determine the correct turns before I buy a motor.

ESC: HobbyKing X-Car 45A Brushed Car ESC
Servo: BMS-630MG Super Strong Servo 13kg / .17sec / 49g

[Shape_Shifter]

I am running a cheap sensored brushless system right now. It is working really well and I highly recommend it for it's price and crawling ability. It's this one: SKYRC Cheetah 2590KV 13 5T Sensored Brushless Motor CS60 60A ESC Combo ME640 | eBay

I use an 8t pinion for maximum torque - I think it's a Parma. I have never noticed a noise difference in pinion brands. If your pinion is noisy, you probably don't have it adjusted right.

My servo, however, is the most expensive servo I have ever bought (and I have been buying servos of over 30 years). This one is awesome - Savox SB-2270SG "Monster Torque" Brushless Steel Gear Digital Servo (High Voltage) [SAV-SB-2270SG] | Radios & Accessories - A Main Hobbies

I am very happy with this setup.

[Chief]

I'm happy with my setup. Crawls great, and has plenty of wheel speed if need.
CC SV3
Cheap Atomik 35t
Hitec 645
G-Force 3s 1300mah 30c batts
Traxxas TQ Link TX/RX

[kunas]

tekin fxr 35t HH , 1300 3s air tronics servo

[Grimsock]

Tekin FXR w/CC 10a BEC
Tekin 45t on 3s
Savox 1231 servo

I needed to set up anti-wrap bars with the 3s, but now its perfect!

[steanlol]

Im running 3s
Holmes BRXL
Holmes 45T motor
Hitec 7955tg servo , bit over the top but hey it works great
Needs nothing else

[HunterGilmore]

whats is a good servo to get that comes waterproof?

[JatoTheRipper]

Originally Posted by HunterGilmore

whats is a good servo to get that comes waterproof?

I bought this one as a back up for Sawback and SCX10. I ended up buying a used Wraith and installed it in there instead. I have not had in water so I can't vouch for the waterproofing, but it turns the tires without any problem.

BMS-630MG Super Strong Servo 13kg / .17sec / 49g (USA warehouse): Radio Control Planes, Helicopters, Cars, Boats, FPV and Quadcopters - Hobbyking*

[MadMax]

Just fitted out mine with.

1. Leopard hobbies 20.5t brushless motor.
2. Leopard hobbies 80a Waterproof ESC.
3. CYS digital waterproof titanium gear servo, 12kg - 0.09sec.

[Barba77]

Hi
I'm running this set up.

Toro esc 80Ah
Toro brushless 1650kv motor
Savox 1210 Mg servo
Castle creation bec

Great for smooth crawling



Skickat från min iPad med Tapatalk

[QuesoDelDiablo]

It's been a while since this thread has seen any love...

I'm running:

RC4WD 35turn Motor
Yeah racing 60amp ESC (rebranded HobbyWing)
Power HD servo (High torque, high volt, metal gears, aluminum case)

I picked up the ESC and servo as a combo at RCMart and they're surprisingly good quality for the low price.

2S or 3S LiPo

[thead]

i have mine simple. axial 27t motor,rr 12t pinion,tazer 15t speed control,and a savox sw0230wp servo.

[rob5059]

FXR with 35T
CCBEC
7955
3s

[dubyas1989]

I went cheap with axial ae-5 and 27t motor with hitec 645 that I had laying around.

[Swaldron21]

What kind of pinyin are you guys using