|
| LinkBack | Thread Tools | Display Modes |
08-27-2015, 01:47 PM | #21 |
Rock Stacker Join Date: Jan 2015 Location: Kansas
Posts: 89
| Re: First scaler kit. Super excited
Lol that's not gonna happen. My last parts came in today finally. Took almost a month but still cheaper than ordering from the states. Sent from my iPad using Tapatalk |
Sponsored Links | |
08-28-2015, 10:17 AM | #22 |
Newbie Join Date: Jul 2015 Location: Austin
Posts: 16
| Re: First scaler kit. Super excited
I've got those sitting on my desk. Do you need to just take off the C hub and bearing, or does it have to come in from the diff? On the rear, do you just slide out the straight shaft and slip the weight over, and it goes back together easy? Are you going to lube the weight, it kinda seems like a great big bushing.
|
08-28-2015, 04:54 PM | #23 |
Rock Stacker Join Date: Jan 2015 Location: Kansas
Posts: 89
| Re: First scaler kit. Super excited
I had over tightened my u bolts at one point and had to force it in, but it was straight forward. I did lube it as well. Just putt chub and bearing off and slide it in there. Sent from my iPad using Tapatalk |
08-28-2015, 06:26 PM | #24 |
Rock Crawler Join Date: Dec 2014 Location: In the sticks
Posts: 913
| Re: First scaler kit. Super excited
All this talk about lube, chubs and sliding it in is turnin me on I'm liking this crawler porn!
|
08-28-2015, 08:40 PM | #25 |
Rock Stacker Join Date: Jan 2015 Location: Kansas
Posts: 89
| Re: First scaler kit. Super excited
Hahahahahaha I didn't notice it, but this should top it off for you!! Sent from my iPad using Tapatalk |
08-28-2015, 08:41 PM | #26 |
Rock Stacker Join Date: Jan 2015 Location: Kansas
Posts: 89
| Re: First scaler kit. Super excited
Jeepiac this truck is ridiculously heavy now btw. If I ever make it to a meet you can see it for yourself. I also need to figure out some sort of mounting bracket for my fuel and water JUGS Sent from my iPad using Tapatalk |
08-28-2015, 10:24 PM | #27 |
Rock Crawler Join Date: Dec 2014 Location: In the sticks
Posts: 913
| Re: First scaler kit. Super excited I've actually been experimenting with mine in the weight department. Shaved a little off and moved the battery as you know. I'll probably get a set of tubes fairly soon. As for the jugs, double sided tape. |
08-28-2015, 10:25 PM | #28 |
Rock Crawler Join Date: Dec 2014 Location: In the sticks
Posts: 913
| Re: First scaler kit. Super excited
By the way, you'd do her with the lights on, and you know it!!!
|
11-07-2015, 02:13 PM | #29 |
Rock Stacker Join Date: Jan 2015 Location: Kansas
Posts: 89
| Re: First scaler kit. Super excited
Here is an update to the Sawback. Chanced the look of her I like it much better now I also successfully removed the paint from the lights with nail polish remover and q-tips Sent from my SM-G900V using Tapatalk |
11-16-2015, 03:36 PM | #30 |
I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| Re: First scaler kit. Super excited
Your Jeep is looking good, congrats on removing the paint on headlights! I'm not really a lightbar fan and would mount two of those on the bumper and two in the headlight bucket locations. Why are your bedrolls hanging on both sides of the windshield? I liked them better in back with the body clip/bungees. Bumper trim and fold looks way better, I'd put a couple mig or tig spot welds to close the seams or at least ShoeGoo the backside to help hold it together. Keep the updates coming. |
11-30-2015, 12:49 AM | #31 | |
Rock Stacker Join Date: Jan 2015 Location: Kansas
Posts: 89
| Re: First scaler kit. Super excited Quote:
| |
First scaler kit. Super excited - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
my first wraith super excited | dunning3075 | Axial Wraith | 2 | 01-14-2014 07:15 PM |
Excited | asian195 | Chit Chat | 3 | 10-17-2011 11:00 PM |
My first CR, excited! | Got_Demo | Tamiya CR-01 | 10 | 12-26-2010 09:09 PM |
| |