|
| LinkBack | Thread Tools | Display Modes |
08-15-2005, 09:38 PM | #1 |
Quarry Creeper Join Date: May 2004 Location: stuck in a damm jar
Posts: 277
| jeep tlt shocks real esc and servo winch, 4 link pics
Hey guys and gals. I have put tlt shocks on with L shaped brackets made out of stainless. I made the 4 link set up out of tie rods and L shaped brackets made out of stainless. I used all 3mm screws. For an esc I used a tazer, I got some wire and made a Y harness and wired both. I cut the tires. I put a deans plug on the batter. I used an futaba Atack radio 4 channel. For a winch spot I cut out the batter box area on the top and the front side. I mounted the 3003s futaba servo in that area, and drilled a hole in the chassis for the cable. I took out the steering gears and steering motor and cut down all of the mounting points. Then I took the high-speed gear out and put the servo mount there. Then I mounted my servo with the 1 bolt and servo tape. I used tie rods for steering links. I added a 1/3 inch body lift. I plan to clean every thing up and add some bracing. Down the road I plan to make a chassis. If you have any questions I will have no problem answering them.
|
Sponsored Links | |
08-15-2005, 09:40 PM | #2 |
Quarry Creeper Join Date: May 2004 Location: stuck in a damm jar
Posts: 277
|
more pics
|
08-15-2005, 09:54 PM | #3 |
Pebble Pounder Join Date: Nov 2004 Location: Lafayette , Colorado
Posts: 98
|
that is awesome looking
|
08-15-2005, 09:54 PM | #4 |
Quarry Creeper Join Date: May 2004 Location: stuck in a damm jar
Posts: 277
|
thanks I try
|
08-16-2005, 12:28 PM | #5 |
Newbie Join Date: Aug 2005 Location: PHOENIX
Posts: 47
|
PIC'S OF THE 4 LINK PLEASE |
08-17-2005, 09:13 AM | #6 |
Pebble Pounder Join Date: Nov 2004 Location: Lafayette , Colorado
Posts: 98
|
Did the 4 link set up actually improve the crawling capabilities? im not bashing the stock set up i was surprised how well it performs im just curious
|
08-17-2005, 12:37 PM | #7 |
Quarry Creeper Join Date: May 2004 Location: stuck in a damm jar
Posts: 277
|
hey no pics my comp and no pic stuff on this comp and I will let you know if it got better when i can see how a stock one does |
08-19-2005, 12:42 AM | #8 |
Newbie Join Date: Aug 2005 Location: spanish fork
Posts: 1
| Winch
how did you set up the winch?
|
Thread Tools | |
Display Modes | |
| |