|
| LinkBack | Thread Tools | Display Modes |
11-27-2008, 04:50 PM | #1 |
Rock Stacker Join Date: Apr 2007 Location: Cleveland
Posts: 53
| Gmade Team ZERO Shock.....anyone running them?
To anyone using the Gmade Team ZERO Shock, can I get some feed-back on them. Thinking about ditching out my GPM shocks and going with the Gmade. I've read in some prior post that the springs are a little stiff. Also what weight oil is included with them. Gmade boldly states you get a bottle of oil but it doesnt specify what weight. Thanks!
|
Sponsored Links | |
11-27-2008, 05:38 PM | #2 |
Quarry Creeper Join Date: Apr 2008 Location: columbus
Posts: 487
|
i use them and i love them. i do not know what wheight oil comes with them it does not say. the springs are a bit stiff but it is not that big of a problem to me.
|
11-27-2008, 07:03 PM | #3 |
RCC Addict Join Date: Feb 2006 Location: ccxc
Posts: 1,176
|
they rock. direct bolt on. i added lighter oil........
|
11-27-2008, 07:27 PM | #4 |
Rock Crawler Join Date: Oct 2008 Location: San Bernardino Mountains
Posts: 512
|
I loved them but the set I have on ebay right now were just too long for my current setup. They were 124mm & I am now using an 85mm shock. But the Gmade Zero shocks perform well if a bit stiff but I was using them laid down so they worked well. Not as stiff as a stock ax10 shock.
|
11-27-2008, 08:24 PM | #5 |
Rock Stacker Join Date: Apr 2007 Location: Cleveland
Posts: 53
|
tubed-and-lubed, I actually looked at buying your set off eBay but the 124mm are to long for my needs as well. I'm thinking the 104mm.
|
11-27-2008, 08:50 PM | #6 | |
Rock Crawler Join Date: Oct 2008 Location: San Bernardino Mountains
Posts: 512
| Quote:
I actually really like the roadtech shocks for the Cen mg10, very nicely built shock. | |
11-27-2008, 09:29 PM | #7 |
Rock Crawler Join Date: Oct 2007 Location: Grants Pass
Posts: 806
|
I love mine. Im using them with a widow and moa set up. Im using half droop half sprung. They have a large shaft and are very smooth. I like the shortys for my truck Pretty much figure on getting new oil and springs. Losi springs work ok but are a tinny bit smaller
|
Thread Tools | |
Display Modes | |
| |