03-01-2009, 01:30 PM | #1 |
I wanna be Dave Join Date: Nov 2008 Location: Chillin in Utardia
Posts: 2,561
| BEC Mamba troubleshoot
Hey guys just wondering if you guys might be able to help me out. I had everything working and I was switching receiver and when I turned on the new receiver I got no response only to find I had the plugs in upside down. So through my trouble shoot I hooked back up my old receiver and everything came on my mamba and all went through the series of beeps. I still had no throttle then I noticed that I had the esc and the BEC swapped. I switched the plugs so they were correct but now I am getting absolutely no response from the esc. No lights or anything....all my connections and solders are solid. Do you think that I burned up the bec or something. Any suggestions would be appreciated. Nothing I am doing seems to get the esc to come to life. There was no smoke and I still have functioning esc lights and steering is working correctly. |
Sponsored Links | |
03-01-2009, 01:38 PM | #2 |
I wanna be Dave Join Date: Nov 2008 Location: Chillin in Utardia
Posts: 2,561
|
There must be a loose connection somewhere or the bec is dead. I now have the mamba at least lite and but without moving anything I have somehow lost steering. Man I am getting frustrated. I am goig to have to come back to this when I have more time. The only reason I started plugging things in wrong in the first place is because the wife was rushing me because she wants to go somewhere. ARGGGG!!!
|
03-01-2009, 01:40 PM | #3 |
I wanna be Dave Join Date: Nov 2008 Location: Chillin in Utardia
Posts: 2,561
|
Fixed. wow will play with the new radio later. Gosh I hate being rushed. lol |
Thread Tools | |
Display Modes | |
| |