| |
10-03-2005, 08:58 AM
| #1 |
| Rock Stacker Join Date: Jul 2005 Location: Memphis
Posts: 79
|  Mini T servo up to snuff? Well, it looks like using the mini-t electronics I could get propo for less than 15 bucks (Im talkin TX, RX, ESC, & Servo) My only real concern is the mini t servo. Would it have enough power to turn 2.2s at a dead stop? Also, do yall think the ESC could handle the 2 motors and a 6 or 8 cell 2300 pack? |
|  |
| Sponsored Links | |
| | |
|
10-03-2005, 10:44 AM
| #2 |
| 06 Super National Champ   Join Date: Jun 2004 Location: Tennessee
Posts: 10,268
| I don't think the stock Mini-T servo will handle 2.2s. Might be ok with the stockers, though. |
|
| |
|
10-30-2005, 09:22 PM
| #3 |
| Its My Wifes Money!!!   Join Date: Aug 2005 Location: Moody AL
Posts: 570
| Hey STS? Did you ever put the Mini T ESC in you crawler? If so please let me know how you wired it I am wanting to put one in mine, and aint sure how to wire it up. |
|
| |
|
11-03-2005, 06:45 AM
| #4 |
| Rock Stacker Join Date: Jul 2005 Location: Memphis
Posts: 79
| no i didnt do it yet. I may still do it but it is up in the air at this point. |
|
| |
|
11-03-2005, 07:03 PM
| #5 |
| Its My Wifes Money!!! Join Date: Aug 2005 Location: Moody AL
Posts: 570
| I am still thinking about it to. I just can't figure out how I am gonna make the links for the steering servo. Any ideas would help anybody. I am gonna try to use the servo from the mini T might work might now who knows. |
|
| |
|
11-03-2005, 09:17 PM
| #6 |
| Quarry Creeper Join Date: Aug 2005 Location: classified
Posts: 320
| I really doubt that a Mini T servo would even move the tires. I have a FP-S148 full size servo on mine that barely turns the tires. It's the weight of these things, they weigh about 3 times as much as a Mini T. I would say a standard size, high torque servo would be the way to go. |
|
| |
 |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
