|
| LinkBack | Thread Tools | Display Modes |
03-27-2009, 03:02 PM | #1 |
I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN
Posts: 5,073
| New Arrows chassis for MOA HR axles
So i was chosen to be a tester for a new chassis, thanks to saver for his chassis, i will try and do a good write up, i already received my mail from today and was surprised that the chassis was here already. I will take apart my mfm BW and use the axles on this build, i will have to fab some links(not my favorite part), but that's about it, specs.c Target wb 12.5" Twin 35t motors C.C. sidewinder C.C. BEC TP servo 946 Dig f/r Panthers Eritex comp heavies First impression, it's that it is very light and smaller than the MFM B.W. |
Sponsored Links | |
03-28-2009, 12:50 AM | #2 |
RCC Addict Join Date: Apr 2006 Location: On Da' Shelf
Posts: 1,253
|
Looks Good. What kind of skid does it use? |
03-28-2009, 08:14 AM | #3 |
I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN
Posts: 5,073
|
Thanks for the props, i received my chassis without a skid, this is a tester and saver is looking for input from us to design and fab a skid for it, i will be making my own, similar to the one from the mfm B.W.
|
03-29-2009, 06:51 PM | #4 |
Rock Crawler Join Date: Mar 2006 Location: Holiday, FL
Posts: 540
|
Is it done yet?
|
04-11-2009, 10:12 AM | #5 |
RCC Addict Join Date: Apr 2009 Location: Anderson
Posts: 1,332
|
Any updates? How is the build going? Jason |
04-11-2009, 11:26 AM | #6 |
I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN
Posts: 5,073
|
Sorry, i haven't updated this build, we had this past week as holy week and we have vacation for the entire week, before that i had only done the skid plate since it didn't come with one, i will post my progress this next week, hopefully should be finished by tuesday |
04-11-2009, 04:17 PM | #7 |
RCC Addict Join Date: Apr 2009 Location: Anderson
Posts: 1,332
|
Can't wait to see the updated pictures!! Jason |
04-17-2009, 12:09 PM | #8 |
I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN
Posts: 5,073
|
So i started working until yesterday late in the afternoon and today in the a.m. , i had look everywhere to get the cutting board the thickness i needed, but i finally got it and got to work, hereare the progress pics. I wanted a skid a little wider then the mfm one but narrower than the stoc axial. Size comparo with mfm chassis before dissasembly. axles out Mfm b.w. chassis served me well axles mounted up Rear axle clocked Front axle straight Panthers mounted up a little over 3 1/2" clearance, i have to paly around with shock position and or limit the shocks travel. Flex shot |
04-17-2009, 01:01 PM | #9 |
TN State Champ 11,12,13 Join Date: Oct 2008 Location: KTM Talk.com
Posts: 1,796
|
I can't wait to see how you get all those electronics in that chassis w/o any cross braces to mount an electronics plate. Nice lookin build though |
04-17-2009, 01:20 PM | #10 |
RCC Addict Join Date: Apr 2009 Location: Anderson
Posts: 1,332
|
Looking good!! What length shocks are you running? -Jason
|
04-17-2009, 01:54 PM | #11 | |
I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN
Posts: 5,073
| Quote:
On the pics it's running 4" coil overs, but i will be switching to shorter units in a bit, more to come | |
04-17-2009, 08:10 PM | #12 |
I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN
Posts: 5,073
| Now with 3.5" shocks
So i looked around for shorter shocks and i had some 3 1/2" shocks ,i installed them and now my belly clerance is 2 7/8", looks good to me, i will install electronics and test it tomorrow, sorry for the crapy night pics, my cameras flash is toast. |
04-17-2009, 08:47 PM | #13 |
RCC Addict Join Date: Apr 2009 Location: Anderson
Posts: 1,332
|
Those shorter shocks seemed to help out alot. Can't wait to see it finished!!! Jason |
04-18-2009, 03:41 PM | #14 |
I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN
Posts: 5,073
|
Well here are a couple of pics of how the electronics would be mounted, for now anyways, i still habve to clear all that wiring and i also still have the rear axle i can put any of the components on in case i don't like how the rig handles, but so far the test run it seemed very capable for the low belly clearance and incredible stable, i had only ran different chassis with 4" shocks and the arrows drives really well, i was also impressed on the flex, around 60 degress when the shocks are fully compressed, it feels very predictable, although i also feel that it needs upper braces to protect the chassis from bending in case of a hard tumble(i braced mine with tlt braces and spacers). I should be able to get some video monday |
04-18-2009, 05:42 PM | #15 |
I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN
Posts: 5,073
|
Well i managed to get some pics and maybe a minute of video before the camera batt died on me, thanks to Polo for helping on the video and almost killing himself out there on the rocks, i will have a better video on monday, but so far this chassis is pretty impressive, i feel it plants the tires very well on the ground/rocks, i also like that it absolutely uses all the shocks travel. |
04-18-2009, 08:52 PM | #16 |
RCC Addict Join Date: Apr 2009 Location: Anderson
Posts: 1,332
|
Looking good Carlos!!! What shocks are those and what length links are those? So, the chassis is working out great? Keep us updated!!! Jason |
04-21-2009, 04:27 PM | #17 |
I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN
Posts: 5,073
|
Sorry for the late reply, shocks are from a 1/10th redcat buggy , stock lower axial links and and some 1mm longer rod links on the chasiss end, i have some tlt aluminum links for the upper links, i have been testing it and imho i think this chassis is definetly a comp worhty contender, at least on my HR moa axles, i will have more video tomorrow, but you can't go wrong with this chassis and i would definetly get the skid with inboarded link mounts |
04-28-2009, 02:44 PM | #18 |
RCC Addict Join Date: Apr 2009 Location: Anderson
Posts: 1,332
|
Carlos, how is the build coming along? Any updates? -Jason
|
05-30-2009, 10:18 AM | #19 |
RCC Addict Join Date: Apr 2009 Location: Anderson
Posts: 1,332
|
Any comp results with this chassis yet Carlos? -Jason |
05-30-2009, 10:27 AM | #20 |
I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN
Posts: 5,073
|
Hey Jason, i haven't been to the u.s. for any comps this year, but our local comps(we do use USRCC rules btw) my rig has been dominant, we have a couple tlt's and some ax-10 that we do comps with and my hr axles and Arrows chassis have always led the way, i'll look for some video that has been taken on the comps and post up.
|
Thread Tools | |
Display Modes | |
| |