|
| LinkBack | Thread Tools | Display Modes |
05-15-2009, 02:52 PM | #1 |
Newbie Join Date: Oct 2008 Location: Philippines
Posts: 22
| My CLod with servo on chassy
i need feedback from those who have the experience ahead of me. (coz this is my first project crawler) so i should know if i should push through with mounting my servo on the chassy. with this set up i can soak my diffs 7.5 inches deep in streams without water proofing the servo or taking out the servo electronics. http://www.rcuniverse.com/forum/m_46...68/key_/tm.htm Last edited by Zaint; 05-15-2009 at 09:47 PM. |
Sponsored Links | |
05-15-2009, 05:46 PM | #2 |
Pebble Pounder Join Date: Feb 2009 Location: LeMars, Iowa
Posts: 158
|
I'm no pro, but with many years clod experience I'll say this.... just water proof all the electronics. Take the extra time now and you will never have to worry.
|
05-15-2009, 09:59 PM | #3 |
Newbie Join Date: Oct 2008 Location: Philippines
Posts: 22
|
hi there war, so i just pour silicon silastic gasket on the servo electronics and that's it? k, i'll just dig up some good servo waterproofing tips, if you have the link just pls kindly post it here. thx i'm going to do this on my 100+ TG servo, i think i'll just have to do this very carefully |
05-16-2009, 05:42 PM | #4 |
Pebble Pounder Join Date: Feb 2009 Location: LeMars, Iowa
Posts: 158
| |
| |