GMade Shocks Hey all I am new to the crawler scene and have been tinkering with my AX to Edge project. I am having a binding problem in the shafts at full droop. So after doing some reading I am considering going with a shorter shock. From what I can tell the stock AXial shocks are 120mm. My plan is to limit the down travel by using a shorter shock. The GMade's seem to have a good reputation, over the Integy ones. The GMade's also come in a 104mm from what I can tell. So my over all question's are, Will this work? and Where can I get the GMade shocks? Thanks in Advance |
i loved my gmade shocks and they worked great sprung and in droop"thumbsup" the only reason i took them off is cuz i got the dna sss chassis. |
all you need to do is take apart your shocks and put some fuel tubing under the piston to limit travel |
Quote:
|
I've seen the Gmade shocks in action,they do work nice. I was going to get some until I seen the new Axial shock work. Those things are the stuff....they really are all that AND a bag of chips."thumbsup" |
Quote:
|
Quote:
|
shocks Go to www.junfac.com for the shocks. I like them alot |
Thanks I'll give it a shot tonight. Quote:
|
What lenght did you get? Do you need to cut the springs down? |
I considered cutting the springs. I have the Dual Rate's. As for the shocks they are the stock Axial ones. |
All times are GMT -6. The time now is 06:50 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com