| |
07-13-2009, 11:25 AM
| #1 |
| Rock Stacker Join Date: Jun 2009 Location: Bakersfield
Posts: 73
|  Punisher shaft
Hey guys, Im for sure wanting to do the punisher shafts on my warthog. Im guessing ill measure the distance from my tranny to the output shaft on the axle and pick the shaft length that will be that general length? I need to know how to get the rigt length shaft. Thanks Nate
|
|  |
| Sponsored Links | |
| | |
|
07-14-2009, 04:24 AM
| #2 |
| I wanna be Dave Join Date: Nov 2005 Location: Here
Posts: 7,317
|
That is how you do it. Find the one that your length fits between. Just remember that there is some movement when the suspension moves so give yourself some room... |
|
| |
|
07-14-2009, 09:03 AM
| #3 |
| RCC Addict Join Date: Jul 2008 Location: Sin City
Posts: 1,332
|
On RC4WD's website it lists the closed and open lengths of the punishers. Measure the distance like you are and pick the one that best fits right in the middle. You want it as close to middle as you can so it can both compress and extend as the suspension cycles. just for an example: from your tranny output to the axle input is 100mm. you would select THIS ONE that is from 90-120mm. |
|
| |
 |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
