RCCrawler Forums

53 willys · 11-20-2009, 09:23 AM

specs will be as follows....
RC4WD MOA Worminator comp axles
Fubar Skooter Based Home built Delrin Chassis
SS 1/4 lowers
Ti 1/4 uppers
Home brew BTA Steering links
HPI Shocks 3.5 front/4.0 rear
35T Banzai Motors
Dual FXR's
CC BEC @ 6.4V
Hitec 7955TG
4PK
Mayhem Light UCW ALUM Front
Mayhem Light UCW Delrin Rear
Panther Leopards~HB rovers~RC4WD X-locks

I have had my eye on these since the first proto cad drawings....
I finally picked up a set and I'm gonna use them for my 2010 comp rig.
First thing i noticed is these babies are SUPER LIGHT!!!!!!

Front MOA worm is 2.3oz's LIGHTER then the new billet CNC bully axles!!

and the rear is 1.9 oz's lighter then the billet bully!

I will get some axle apart pics later today....I'm pumped to get these on the rocks!!!!

slowngreen · 11-20-2009, 09:29 AM

Im looking forward to seeing this come together!!!!

Jeepial · 11-20-2009, 09:38 AM

Can't wait to see this one..

TOMCAT18T · 11-20-2009, 10:40 AM

Nice. I have been waiting to see a build with these axles.
I'll be watching this one.

helhedded · 11-20-2009, 10:43 AM

subscribed

danielk · 11-20-2009, 05:31 PM

i think your math is a little off...

jcboof · 11-20-2009, 05:44 PM

How light are those Delrin Mayhems??

53 willys · 11-20-2009, 05:54 PM

Quote:

Originally Posted by danielk

i think your math is a little off...

your right...I just glanced....this better..?

2.3oz lighter then a billet bully front
1.9oz lighter then Billet Bully rear

Krakker · 11-20-2009, 06:25 PM

I difinantly wanna see thoughs axles after you crack'm open! Looks to be tougher than a Losi MOA set up, but I'm curious to see the component structure of the shafts/CVD's etc. should be cool though. Do you think the motor configuration be more bennificial on thoughs than the Bully's?

Just Zach · 11-20-2009, 06:44 PM

I'm glad you got a set of these Mark. I can't wait to see how they perform. The center clearance should be awesome!

666 · 11-20-2009, 06:45 PM

How on earth do you mount upper links?

Rockcrawler · 11-20-2009, 06:46 PM

Quote:

Originally Posted by Just Zach

I'm glad you got a set of these Mark. I can't wait to see how they perform. The center clearance should be awesome!

X2

I looked at them a few days ago but wasnt sure if they would hold up to comp abuse. Cant wait to see how they do.

Rockcrawler · 11-20-2009, 06:48 PM

Quote:

Originally Posted by 666

How on earth do you mount upper links?

http://www.rc4wdstore.com/2/product_...roducts_id=833

rentstdi · 11-20-2009, 06:59 PM

Quote:

Originally Posted by Rockcrawler

http://www.rc4wdstore.com/2/product_...roducts_id=833

But there is a motor where that servo and link "holder" is......

I really want to see how this turns out, It should be a killer on the courses.

MTHead · 11-20-2009, 07:15 PM

This is going to be interesting, i hooked..

Rockcrawler · 11-20-2009, 07:16 PM

Quote:

Originally Posted by rentstdi

But there is a motor where that servo and link "holder" is......

True...didnt even notice that.

I am sure he has it planned out though.

53 willys · 11-20-2009, 07:59 PM

sorry guys I'm at work tonight so I am only checking in on my phone...

the upper links mount on the sides of the worm box's....there are two adjustable link holes

better pics and replys later...I got the pics of the guts.but I will have to post them in the am.

53 willys · 11-21-2009, 09:13 AM

Quote:

Originally Posted by Krakker

I difinantly wanna see thoughs axles after you crack'm open! Looks to be tougher than a Losi MOA set up, but I'm curious to see the component structure of the shafts/CVD's etc. should be cool though. Do you think the motor configuration be more bennificial on thoughs than the Bully's?

I'm not sure how they will compare to the bully axles....I REALLY love my bullys axles and this may be hard to get used to...but I'm also really excited to have the rig lock up on a hill......I'm hoping the instant brake the worm gears give will make for some very precise climbing digs.....you guys who have had your rig roll back on a big climb while trying to dig will know what i'm talking about

Quote:

Originally Posted by Just Zach

I'm glad you got a set of these Mark. I can't wait to see how they perform. The center clearance should be awesome!

Thanks Zach i'm pumped to get this on the rocks for sure!!

Quote:

Originally Posted by 666

How on earth do you mount upper links?

there are two holes on the sides of the worm boxes...but i'm gonna be doing something different...

Quote:

Originally Posted by MTHead

This is going to be interesting, i hooked..

thanks John....I need to send my homebrew version of the skooter chassis to you and have you cut me one from the Fubar lab!...mine kinda looks like a 6 year old cut it out..haha

53 willys · 11-21-2009, 09:22 AM

ok I opened them up....axle's are EASY to get to and should be easy to maintain.

the pics were not looking very good so I made a REALLY low budget and low quality light box...gonna make a new one that works next time..
anyway you get the idea..
here is the front and rear cvd's the smaller blue is the rear worm and the bigger is front worm..the red axle is a bully v2 or 3

axle shafts..

worm gear and support bearing

motor mount system..

BEELZEBOB · 11-21-2009, 09:24 AM

those are sleek.

ninja status.

11-20-2009, 09:23 AM	#1
53 willys I wanna be Dave Join Date: Jan 2009 Location: laying low Posts: 2,508	~53 Willys 2010 Comp Rig Build~ RC4WD MOA Worminator Build~ specs will be as follows.... RC4WD MOA Worminator comp axles Fubar Skooter Based Home built Delrin Chassis SS 1/4 lowers Ti 1/4 uppers Home brew BTA Steering links HPI Shocks 3.5 front/4.0 rear 35T Banzai Motors Dual FXR's CC BEC @ 6.4V Hitec 7955TG 4PK Mayhem Light UCW ALUM Front Mayhem Light UCW Delrin Rear Panther Leopards~HB rovers~RC4WD X-locks I have had my eye on these since the first proto cad drawings.... I finally picked up a set and I'm gonna use them for my 2010 comp rig. First thing i noticed is these babies are SUPER LIGHT!!!!!! Front MOA worm is 2.3oz's LIGHTER then the new billet CNC bully axles!! and the rear is 1.9 oz's lighter then the billet bully! I will get some axle apart pics later today....I'm pumped to get these on the rocks!!!! Last edited by 53 willys; 11-20-2009 at 05:54 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-20-2009, 09:29 AM	#2
slowngreen RCC Addict Join Date: Jun 2008 Location: Nunya Idaho... Posts: 1,559	Im looking forward to seeing this come together!!!!

11-20-2009, 09:38 AM	#3
Jeepial I wanna be Dave Join Date: Sep 2008 Location: behind the wheel of a monster truck... Posts: 2,878	Can't wait to see this one..

11-20-2009, 10:40 AM	#4
TOMCAT18T Rock Crawler Join Date: Mar 2008 Location: ...in your meter box... Posts: 616	Nice. I have been waiting to see a build with these axles. I'll be watching this one.

11-20-2009, 10:43 AM	#5
helhedded I wanna be Dave Join Date: Nov 2007 Location: Memphis Posts: 4,786	subscribed

11-20-2009, 05:31 PM	#6
danielk RCC Addict Join Date: Jul 2006 Location: Pasadena Posts: 1,118	i think your math is a little off...

11-20-2009, 05:44 PM	#7
jcboof I wanna be Dave Join Date: Oct 2008 Location: I miss Rowdy Posts: 2,238	How light are those Delrin Mayhems??

11-20-2009, 06:25 PM	#9
Krakker I wanna be Dave Join Date: Nov 2008 Location: Where freedom is earned. Posts: 2,011	I difinantly wanna see thoughs axles after you crack'm open! Looks to be tougher than a Losi MOA set up, but I'm curious to see the component structure of the shafts/CVD's etc. should be cool though. Do you think the motor configuration be more bennificial on thoughs than the Bully's?

11-20-2009, 06:44 PM	#10
Just Zach '08 2.2 National Champ Join Date: Nov 2006 Location: UTRCRC Posts: 5,585	I'm glad you got a set of these Mark. I can't wait to see how they perform. The center clearance should be awesome!

11-20-2009, 06:45 PM	#11
666 MODERHATER™ Join Date: Nov 2005 Location: Colorado Posts: 10,939	How on earth do you mount upper links?

11-20-2009, 07:15 PM	#15
MTHead DOOH!!! Join Date: Feb 2007 Location: AZ Posts: 2,105	This is going to be interesting, i hooked..

Sponsored Links

11-20-2009, 07:59 PM	#17
53 willys I wanna be Dave Join Date: Jan 2009 Location: laying low Posts: 2,508	sorry guys I'm at work tonight so I am only checking in on my phone... the upper links mount on the sides of the worm box's....there are two adjustable link holes better pics and replys later...I got the pics of the guts.but I will have to post them in the am.

11-21-2009, 09:22 AM	#19
53 willys I wanna be Dave Join Date: Jan 2009 Location: laying low Posts: 2,508	ok I opened them up....axle's are EASY to get to and should be easy to maintain. the pics were not looking very good so I made a REALLY low budget and low quality light box...gonna make a new one that works next time.. anyway you get the idea.. here is the front and rear cvd's the smaller blue is the rear worm and the bigger is front worm..the red axle is a bully v2 or 3 axle shafts.. worm gear and support bearing motor mount system..

11-21-2009, 09:24 AM	#20
BEELZEBOB I wanna be Dave Join Date: Jan 2009 Location: By a lake in Thornton Posts: 2,218	those are sleek. ninja status.

RCCrawler Forums

Thread: ~53 Willys 2010 Comp Rig Build~ RC4WD MOA Worminator Build~