RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   General Crawlers (http://www.rccrawler.com/forum/general-crawlers/)
-   -   2.2 crawler weight (http://www.rccrawler.com/forum/general-crawlers/226114-2-2-crawler-weight.html)

eclipse9 01-22-2010 09:52 PM

2.2 crawler weight
 
hey guys im just wondering how much peoples 2.2 crawlers weigh?i have a 2.2 tuber and it weighs 7.7 lbs. im just interested in knowing what you guys run

legion1capone 01-22-2010 10:15 PM

My venom creeper weighs in at 6lbs 11oz.

shelljeep 01-23-2010 12:51 AM

How much of that is tire ballast?
Good Thread, would be cool to know what people's front/rear bias is also.
My LNC weighs in at 5# 5oz. That's with a 6000 mAh Lipo weighing around 11oz and 9 oz per front/zero rear.
Bias is 3# 5 oz front and 2# rear, 62/38. Basically stock, just swapped servo, motor, and weighted tires.

GB's 05 01-23-2010 03:01 AM

Not having weighed my creeper I'm not positive, but I'd say 7+#'s. Seeing how much weight I use and the creeper weighing 5+#'s stock she's a pig.

silentcircus 01-23-2010 09:44 AM

My LCC is 6 lbs. and 10 oz. with VP DH ProComps (fully weighted) in front and VP SLW V4s in the back. I have the 3S lipo in the ESC tray and the ESC in the battery tray for a 60/40 weight bias.

wrightcs77 01-23-2010 04:02 PM

LCC is 5 lbs 15 oz. Each front tire (tire, foam, rim) is 15 oz, each rear is 7.75 oz. All screws on the chassis are now light aluminum to save weight up high.

Stormin2u 01-23-2010 04:11 PM

My Axial based 2.2 comp rig is 6 lbs 2 oz.

bustedcrawler 01-23-2010 04:23 PM

Losi Comp Crawler....5lbs 12oz ish, need to reweigh it again. VP DH's full up front, VP SLW V2s out back, and close slightly over 60/40 weight basis. Enough that my balance point is forward of the skid.

Manning 01-23-2010 04:40 PM

My axial is 6 lbs 2 oz or so, and each front tire/wheel assembly is about 15 oz each.

Most comp rigs are in the 6 lb range.

Dennis P 01-23-2010 05:28 PM

weigh
 
Hello guys my Berge V1 Beetle Juice crawler is 96oz or 6.0 pounds with 3s lipo installed.I have 56oz on the frt wheels and 40oz on the rear.I have done no gringing or drilling of my axles.It could be lighter ,but so could I.:shock:

crawlinghulls 01-23-2010 05:47 PM

My Bully is right around 6.5 lbs. I should be able to get it to around 6.25

eclipse9 01-23-2010 06:40 PM

mine is the heaviest so far ...maybe i should shed some weight off it:?

oldhippie 01-23-2010 07:38 PM

My comp rig is right at 5lb. My V2 berg is at 5.6lb.

eclipse9 01-23-2010 08:06 PM

wow ive got myself a pig of a comp crawler lol

hotbodies racer 01-24-2010 07:24 PM

my losi weighs 6,pounds with a 4-cell and 12oz in each front, none in rear.

liverkiller1 01-25-2010 10:16 PM

mines a swish below 7lbs

dickwart 01-25-2010 11:40 PM

My ax10 is 5.5lbs w/out wheel weights... I run it around 6...

catpwred 01-26-2010 12:00 AM

my bully is 6.3 lbs with 3oz in each front tire but i have lite cases in the rear so really i'm about 1lb heavier in the front

ol' gravy leg 01-26-2010 07:27 AM

my berg is 5.5lbs rtr

The Violator 01-26-2010 07:28 AM

My Beetlejuice bergis a flat 6 pounds even with 12 oz in the 2 front wheels.


All times are GMT -6. The time now is 12:33 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com