| Nova's Ark | 08-31-2010 03:20 PM |
Crawler Innovations Servo Guard - Servo Clamp - Servo Mount GIVEAWAY!!!
Up for grabs is my a Crawler Innovations Servo Guard - Servo Clamp - Servo Mount. I also wanted to announce that I was able to negotiate with a new CNC company to have these made at a lower cost than what I was previously paying"thumbsup". So with that said, I am passing the savings on to the customer and these are now available for $16.95 instead of the old price of $19.95. They are still 100% made in the U.S.A. and cut from T6 6061 Aluminum. "thumbsup"
This part can serve three purposes. First it protects your servo from rock rash and abuse, but it is also a clamp to securely hold / mount your servo in place so that you do not break the mounting tabs off you steering servo. You can also use these as a servo mount on your custom builds as well.
These are available on my web site if you would like to order your own: http://www.crawlerinnovations.com/
The giveaway winner will be chosen by a random number generator on September 30th. To enter this giveaway you must be a star holding member here on RCC. If you need information about becoming a star holding member, click this link.
Thank you for entering and good luck"thumbsup". http://www.crawlerinnovations.com/pr...o%20guard1.jpg http://www.crawlerinnovations.com/ga...serialNumber=2 http://www.crawlerinnovations.com/ga...serialNumber=2 http://www.crawlerinnovations.com/ga...serialNumber=2
Here is the proto type I have been running on my Rock Show Berg for the last six months. As you can see from the picture, it has taken it's share of abuse and properly protected the servo while doing it. http://www.crawlerinnovations.com/ga...serialNumber=2 | 