1:18 help needed hi i just got my 1:18 jeep rock crawler friday and yesterday while it was charging i took a pen and cut it and lengthened the wheel base front and rear, I then gave it a bit of a body lift cause the tires were hitting im wondering how to take off the wheels, if there is a way to widen the width of the wheel base, and how to do a tummy tuck? TIA Steve |
check the 1/18th nylint forum....TONS of info. Your on jeepaholics.com arnt you? |
Quote:
oh and ya im on jeepaholics.......that and about 18 other jeep BB's ;-) |
Quote:
i didnt want to blemish the pretty chrome.......http://smilies.sofrayt.com/%5E/n/pukeface.gif do the 1:6 tires fit the 1:18? or is that asking for stuff to brake??? oh and it seems that the front tire is held on by a screw and the back is a small bolt trying to think of a way of widening the width of the wheelbase i have a few ideas:idea: :idea: :idea: |
Try taking the 4 screws out of the back of each wheel and put the back part of the wheel on backwards. Little wider and taller This is where I found it http://www.rccrawler.com/forum/showt...ghlight=narrow |
Only the 1/6th includes the tool for removing the caps. I have tried lots of things, and the only thing that made a difference was custom cutting the tires, and removing the springs from the shocks. |
i might need a new tire.....and a finger :roll: i was drilling the center a lil bit and i guess the bit was too sharp it wasnt really cutting then i pushed and it went through the tire and into my finger hurt alot and blead a bunch and still sorta does if i squeeze it i will try the flipping the tire around maybe BTW anywhere to get new wheels just need the chrome part??? |
lol, well done wiht the drill :D i just sliced some skin off my thumb trimming plastic parts :? |
ok well seein as i am now hated here..but ur new and dont know me..depending on how wide u want it u could even go with narrowed 2.2s...umm cutting springs help just removing them helps alot |
Quote:
ok i dont hate ya .....maybe later :roll: lol so what is this 2.2 mod? and how do i do it? removing the springs ...........maybe might try that out once we have a hobby shop i might stop in there and see what kind of stuff they have |
All times are GMT -6. The time now is 12:59 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com