Go Back   RCCrawler Forums > RCCrawler General Tech > General Crawlers


Thread: Axle Stall (clod stall)

LinkBack Thread Tools Display Modes
Old 03-31-2006, 12:56 PM   #1
Rock Stacker
Join Date: Feb 2006
Location: boondocks
Posts: 53
Default Axle Stall (clod stall)

is there any way to stop my nylint from stalling out
i get in certian positions and ether the front or the back wont spin
i dont even have huge tires on it just stock tlt tires
TheRangerman0 is offline   Reply With Quote
Sponsored Links
Old 03-31-2006, 02:14 PM   #2
Rock Stacker
Join Date: Oct 2005
Location: Charleston Tennessee
Posts: 72

There are a few mods to fix that but even if you use these mods, you will still get into positions where you will stall out like if one tire gets wedged between 2 rocks or stumps it will either slip or stall out.

I took my axles apart and glued the fingers on the gearset with the metal plate to the slots on the opposite gearset and it worked fine for awhile.
TJ_Krawler is offline   Reply With Quote
Old 03-31-2006, 11:23 PM   #3
I wanna be Dave
Join Date: Sep 2004
Posts: 2,386

your better to stall out motor then to strip out the gears.if you want to cut down on the stalling you can do the low low gear mod or maybe increase to voltage by going to a 7 cell pack.
twisted is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 11:45 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com