| |
02-11-2011, 09:58 PM
| #1 |
| Newbie Join Date: Feb 2011 Location: Brighton
Posts: 2
|  help with a honcho
I have a honcho with sidewinder esc and a novac 55t motor and futuba metal steering servo, today while crawling whenever I would steer my speed would become eratic or stop then return when I went to neutral with the steering, thought it was low battery so changed battery and no change. any help?????? |
|  |
| Sponsored Links | |
| | |
|
02-11-2011, 10:25 PM
| #2 |
| Rock Crawler  Join Date: Mar 2008 Location: 920 Valley of the Fox
Posts: 768
| 
what radio gear? & get a castle bec.
|
|
| |
|
02-11-2011, 11:18 PM
| #3 |
| Rock Stacker Join Date: Dec 2008 Location: CARO
Posts: 65
|
i had a similar problem i was racing a rc8te with the monster system an a high tech servo my motor would bog ever time i turned, the servo was drawing a crap load of power and making a loud motor noise like reeereee the servo was a high tech hsc-5998tg also check your frame rate if your running a anilog servo with digital tranmitter you will have problems
|
|
| |
|
02-12-2011, 04:18 PM
| #4 |
| Rock Crawler Join Date: May 2009 Location: Queensland, Australia
Posts: 611
|
Sounds like you need a BEC......
|
|
| |
|
02-12-2011, 08:54 PM
| #5 |
| Newbie Join Date: Feb 2011 Location: Brighton
Posts: 2
| 
got it figured out, I blew up a servo. I installed a new hitec today and it worked fine
|
|
| |
|
02-12-2011, 09:59 PM
| #6 |
| Suck it up!   Join Date: Mar 2008 Location: Arkansas
Posts: 11,652
|
You still need a bec. Its pretty much mandatory when you have a crawler.
|
|
| |
 |
| Tags |
| esc, honcho sx-10 scaler, sidewinder |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
