|
| LinkBack | Thread Tools | Display Modes |
02-18-2011, 12:13 PM | #1 |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
| 3mm threaded spacers........
i'm looking for a vendor here that had a spacer kit for sale that made the spacers and put them in a kit....but i need him or any vendor that can make custom length threaded spacers in 3mm thread....search turned up crap as it seems like it does all the time ....i did many search's with spacers only and what i thought were reladed words, got a ton of build threads with the word spacers and other words i used in them ....but nothing on any vendor doing spacers, even searched in vendors section with the same dull results ....what i'm looking for are 14 custom made 3mm threaded spacers that are 13.40mm long and no bigger then 6mm O.D. 5mm O.D. would be the tits HELP ! ! ! ........bob .... |
Sponsored Links | |
02-18-2011, 01:16 PM | #2 | |
RCC Addict Join Date: Oct 2007 Location: Kennewick, Washington
Posts: 1,382
| Quote:
| |
02-18-2011, 05:11 PM | #3 |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
|
yes .5275" and no male ends, just threaded pipe/spacers i can use a button head screw from both sides on....i need them for this.... so i don't need to use a tube spacer with a nut and bolt, kinda looks cleaner that way ....let me know, thx........bob .... |
02-18-2011, 05:23 PM | #4 |
Rock Stacker Join Date: Feb 2011 Location: FrayedEdgeofSanity
Posts: 60
|
Smallparts.com might have what you need.
|
02-18-2011, 05:25 PM | #5 |
Rock Stacker Join Date: Feb 2011 Location: FrayedEdgeofSanity
Posts: 60
|
The kind of spacer you're describing is called a standoff.
|
02-18-2011, 05:44 PM | #6 |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
|
yeah i know they are standoff's but the only ones i can find are 10mm and 15mm on both sides of the scale i need of 13.40mm....i'll look at small parts and see, thx ........bob .... |
02-18-2011, 05:51 PM | #7 |
I wanna be Dave Join Date: Mar 2009 Location: sittin in the sky
Posts: 4,630
| |
02-18-2011, 08:23 PM | #8 |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
|
yeah i looked at the standoff's i have and they have a bigger end then the middle part that is too big to use where i need them....yeah i bought some 98mm threaded alum pipe "AKA" axial 6mm links and cut them down to what i needed, but lots of file work to get them the same size now ........bob .... |
02-19-2011, 08:53 AM | #9 |
I wanna be Dave Join Date: Nov 2010 Location: 07456 N. NJ USofA
Posts: 8,314
| Cheap/easy would be to buy the shorter standoffs, then add thin flat washers between the plate & standoff to get the correct length. |
02-19-2011, 09:00 AM | #10 |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
|
yeah i thought bout that too, but i want a cleaner look....i have a plan of using 3/16" brakeline and 6-32 screws if they aren't too much bigger then 3mm hardware....i don't have much room to enlarge the screw holes on the side plates.........bob .... |
02-19-2011, 11:42 AM | #11 |
I wanna be Dave Join Date: Nov 2010 Location: 07456 N. NJ USofA
Posts: 8,314
|
I could make the 1/4" OD hollow aluminum tubes to your length, but I'll be dammed if I will thread them....... I gotta go back and "make chips" on your spool (Calvin is away this weekend....I can get "my" stuff done........) |
02-19-2011, 11:49 AM | #12 |
RCC Addict Join Date: Jun 2005 Location: St. Albans
Posts: 1,441
|
I would contact a local machine shop if you are really needing the parts to be that specific and dont have the ability to make the parts your self.
|
02-19-2011, 12:31 PM | #13 |
I wanna be Dave Join Date: Nov 2010 Location: 07456 N. NJ USofA
Posts: 8,314
| |
02-19-2011, 05:00 PM | #14 | |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
| Quote:
i have the threaded alum pipe axial makes cut to size now, 8 i need for my trans and transfer case spacers....i just need to hand file them to 13.40mm and tap the threads in the ones i cut past the threads ....i just look at some 6-32 hardware/threaded rod and it's not much bigger then 3mm hardware, so now i might go with threading 3/16" brake line to 6-32 screws and have smaller dia spacers .........bob .... | |
02-20-2011, 08:45 AM | #15 |
Rock Stacker Join Date: Feb 2011 Location: FrayedEdgeofSanity
Posts: 60
|
I gotta ask... why not build it with 1/2" channel stock and shim the gears to fit?. Or you could easily plunge cut a box from bar stock if you have access to a vert mill.
|
02-20-2011, 09:38 AM | #16 |
I wanna be Dave Join Date: Mar 2008 Location: Wayne county. PA
Posts: 2,507
|
don't have access to fine equipment like that, i can use it....dril press and hand tools, it's the MacGyver in me sorry ........bob .... |
02-23-2011, 10:20 PM | #17 |
Rock Stacker Join Date: Feb 2011 Location: FrayedEdgeofSanity
Posts: 60
|
Sorry, thought you had access to machine tools.
|
| |