|
| LinkBack | Thread Tools | Display Modes |
10-11-2011, 08:32 PM | #1 |
Quarry Creeper Join Date: Mar 2004 Location: Central NY
Posts: 387
| TXT/Clod CVD's with wheel adapters
Has anyone installed TXT or Clod axle CVD's along with wheel adapters? I've got a set of Junfac 17mm adapters an to run those I'll need to find longer bolts to attach the wheels. Should be easy enough but I was wondering has anyone else run into this?
|
Sponsored Links | |
10-11-2011, 08:40 PM | #2 |
RCC Addict Join Date: Apr 2006 Location: Home of the ORIGINAL Terminator chassis
Posts: 1,252
|
Just use a #10-32 x whatever length bolt and lock washer and you should be fine. The bolt will thread right into the CVD's.
|
10-11-2011, 08:50 PM | #3 |
Quarry Creeper Join Date: Mar 2004 Location: Central NY
Posts: 387
|
Yea that's the current plan, to find a longer bolt. I was just wondering if anybody had done something different than that; used a different adapter or somethin.
|
10-12-2011, 07:58 AM | #4 |
RCC Addict Join Date: Apr 2006 Location: Home of the ORIGINAL Terminator chassis
Posts: 1,252
|
Usually whatever adapter you run will come with some extended hardware/barrel nuts to mount it. Since you have aftermarket axles, the adapter kit hardware likely won't work so you'll have to use the longer bolts.
|
10-12-2011, 08:20 AM | #5 |
Quarry Creeper Join Date: Mar 2004 Location: Central NY
Posts: 387
|
Found some longer bolts at a place on the way to work. But now I have to wait all day to install them. |
Thread Tools | |
Display Modes | |
| |