New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? MAYBE Call me crazy, but this might be fun to turn into a crawler.... http://www.radioshack.com/product.as...Fid=60%2D4386# I'm going to go check it out tonight to see if its worth anything.... has anyone else seen this? http://www.radioshack.com/images/Pro...0/l60-4386.jpg |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M The vid looks interesting, too bad you can't get it with the Peterson's Avalanche body on it |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M someone already put them on something else http://az-rcfreaks.com/modules.php?n...opic&t=974 |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M Tracks are avalible seperately for $8.29 a piece + shipping PN: 12422051 Left track Assembly x 2 11422044 Right track Assembly x 2 They are NOT direct bolt ups to anything other than Tamiyal TL01 based vehicles. I'm sure adapters to clod/txt/XF could be possble. Probably TXT or clod is the most realistic though. I'll Go down to RS and checkout the rear ends of the track assembly. |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M I was just thinking, after seeing one at radio shack, that the mattracks might bolt up to t TLT axle.. Hmmmm... |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M I wonder if you could adapt them to a Maxx :?: :?: :?: |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M They are already being adapted to maxxes RAMtechRC is working on it. |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M tl01 rims bolt right on to the txt.... eh eh eh... yeah... r u thinkin what im thinkin? im going to run down to rs myself and see what i can do.... where did you get the part #'s? radioshack.com doesnt register them. pn # 12422051 lh side 11422044 rh side http://www.ramtech-rc.com/RAMTraxxMT.JPG |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M Part numbers have to be used AT a radioshack store...Online doesnt carry them. Its not the rims that you need...its the TLO1 hubs...different story. they DO NOT bolt up to a clod/txt as far as i know. Got them from my buddy who works at the shack. go in and ask them to look up those part numbers. you'll need 2 of each type (L & R) to make a complete set for your truck. |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M then i was working on my txt, i bolted up my tl01 drifting slicks to my txt and had a little fun. the hubs are the same size, the only differance is when you do so you have to use a bunch of washers on the shaft because the txt shafts are longer... it looked really funny, ever drift a crawler before? its entertaining yet sad at the same time.... do these bolt to the knuckle to keep them from spinning over? |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M i doubt those tracks would do any good on the rocks. i know my dozers don't do very well on rocks. they bounce around and slide all over more than anything :D |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M Bet they would ROCK in the snow though. :twisted: I thought about buying one the last time I was at RS but I got enough projects right now. I'll just buy the kit. :lol: |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M I used to work at Rat Shack. You can order those parts in the store or by calling 1-800-241-8742. Give them the part number and they will ship them. Shipping is extra. |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M Ya they would Work Great in the Snow!Would Need some good Tire spin. |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M had this idea a while back. interesting to hear that other peeps are doing the same thing. so do u think it will look good on tlt-1? |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M Quote:
Same size as a Clod or TXT. So why the adaptor? :? |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M can they work on a tlt 1 or not that would be cool to do to atlt 1 so do you think they will. jeeprocker. |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M Anybody know what scale the body is? |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M The website says 1:10 |
Re: New Radio Shack Mattraxx ..... CRAWLER POSSOBILITIES? M Ok one thing What stops the tracks from fliping? You know the belt clogs stops and rotates the whole belt assembly. |
All times are GMT -6. The time now is 09:20 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com