questions need answers

[hellhound]

hey guys im loking for answers im building a 1/6 scale rc truggy so im going to you guys for answers



im looking at a 4 link 3 link or a triangulated 4 link with the lower links at the centre of the diffs

[ozyint]

Originally Posted by hellhound

hey guys im loking for answers im building a 1/6 scale rc truggy so im going to you guys for answers



im looking at a 4 link 3 link or a triangulated 4 link with the lower links at the centre of the diffs

What about wraith axles? Not really sure what you were asking here, about the links or axles or both, but they should be large enough for a 6th scale build and have the described 4 link setup at the center of the diffs. If they are too big scx10 axles would work with the 4 link they now send out in the kits.

[hellhound]

im building my axles there 15" wide i wanted to flip the link setup so the triangle links are on the bottom

[ozyint]

Originally Posted by hellhound

im building my axles there 15" wide i wanted to flip the link setup so the triangle links are on the bottom

As in on the bottom of the axle, under the driveline? Or are you going to be running MOA? Any pics of the axles would help.

-Edit, also what diff do you plan on running with them?

[hellhound]

there monster gt diffs with custom axle housings and yea the plan was for under the drive line and im running drive shafts i dont have pics yet

[eisman]

Originally Posted by hellhound

hey guys im loking for answers im building a 1/6 scale rc truggy so im going to you guys for answers



im looking at a 4 link 3 link or a triangulated 4 link with the lower links at the centre of the diffs

Originally Posted by hellhound

im building my axles there 15" wide i wanted to flip the link setup so the triangle links are on the bottom

Originally Posted by hellhound

there monster gt diffs with custom axle housings and yea the plan was for under the drive line and im running drive shafts i dont have pics yet

What exactly are you trying to ask? You say you want answers to your questions, but you haven't asked anything yet.

Even a little bit of punctuation would make you a lot easier to understand.

[hellhound]

i got my answers from a 1.1 crawler fab shop

[eisman]

Originally Posted by hellhound

i got my answers from a 1.1 crawler fab shop

I guess we'll never know what you wanted.
Thanks for comin' out.

[hellhound]

Originally Posted by eisman

I guess we'll never know what you wanted.
Thanks for comin' out.

i wanted to put the link mount on the center diff on the bottom of the diff