Super 300/300HD's

[Aussie Nerd]

Thanks Might have to put my order in.

Cheers
Kieren

[stubs179]

Wow! This tread is full of professionalism.

[RcBro]

Pictures are sweet!!

[SDS Customz]

Originally Posted by Erik D_lux

Ok, I see now. I was confused by using Axial C's with Wraith knuckles, I thought you could use Axial 8* knuckles with them. What you said below looks like you can take a Axial 8* knuckle and use and adapter that works like a Wraith knuckle IMO



Its confusing to say the least. Thanks for not being a dick about it.

Im sorry, I tend to imagine that those of us making parts are pretty quick at skimming the threads for info. the question was answered a few times in different ways(post 6,post 22 ect.) I didnt feel I was being a dick, I have a really cool video about a square peg/round hole(it even shows the 8*angle and the issue of putting the peg in the hole) But posting that video would truely be a DICK move. Nuff said cant wait to comp with ya'll next weekend.Back at ya

Originally Posted by Aussie Nerd

I agree with Erik, it might be helpful to change the description of the 'adaptors' to say they are basically a top hat with a spacer attached to take up the size difference between AX10 8* and Wraith/XR10 8* C hubs.

Also Erik something like felsenfest knuckles with a longer distance between the bearing and the kingpin hole would be all that is required to use a standard ax10/berg C hub from what I can tell. I think egressor even made a set at one stage to use XR10 uni's on a ax10, maybe I was imagining it though.

EDIT found it http://www.rccrawler.com/forum/axles...ml#post3024421

Also does the XR10 set use a axial style drive tang or your usual berg style?

Kieren

Kieren- I havent had the time to pic up the rest of the little things that I want to post pics of though obviously you get the hole 8*angle part wont be accepted by a straight part.

I was totally unaware of these EGGRESSor knuc's those are pretty "BA"
and would definetily work great with the new product im sure. Personally if I was spending the money for the shafts and knuckles Id want the 8* as well. Though its always nice to know of the options out there.

As Krawl' showed in the pic the XR's use a stock style drive tang. While I dont like that style it wasnt feesible to make a new gear locker and try and have it work with all of the variations out there!

If you think it will help everyone understand I will change the description

Originally Posted by Aussie Nerd

Thanks Might have to put my order in.

Cheers
Kieren

Well then maybe we'll here from ya

[RcBro]

As promised

[snail78]

hey John do you have any video of these axles in use on a rig?

[Erik D_lux]

Originally Posted by SDS Customz

Im sorry, I tend to imagine that those of us making parts are pretty quick at skimming the threads for info. the question was answered a few times in different ways(post 6,post 22 ect.) I didnt feel I was being a dick, I have a really cool video about a square peg/round hole(it even shows the 8*angle and the issue of putting the peg in the hole) But posting that video would truely be a DICK move. Nuff said cant wait to comp with ya'll next weekend.Back at ya

Saying "Axial 8*knuckle to Wraith Knuckle Adapters" makes it look like you CAN run a AX10 8* knuckle if you use an adapter. So, if you can run an AX10 8* knuckle, you should be able to run a NON 8* AX10 with those adapters since they are basically the same thing.


Come to find out, you cannot run anything other than a Wraith knuckle.


You would be better off calling it a "Axial 8* C hub to Wraith Knuckle Adapters". That way it looks like its an adapter from a C to a knuckle (which it is).


If I were to plug my iphone into the wall I would not want a "wall to wall adapter". I would need a "USB to wall adapter".


Maybe now you can see why I was confused? Looks like you were as confused as I was thinking I wanted to put an 8* knuckle on a NON 8* C All the acronyms and nomenclature gets confusing, especially if you have never seen the product or know how it works. Its obvious now though that I have the answer and I can go back and read posts by others that explain this.


I am better at accepting beers than apologies


See you this weekend

[RcBro]

Originally Posted by snail78

hey John do you have any video of these axles in use on a rig?

We were talking about this today and might be able to get one before he leaves for pcc this weekend. His sportsman's truck really showcases how well these can turn!

[SDS Customz]

Originally Posted by snail78

hey John do you have any video of these axles in use on a rig?

If it works for william to video we will try to get some after work tuesday!!

[snail78]

Originally Posted by SDS Customz

If it works for william to video we will try to get some after work tuesday!!

Cool thank you. Or I can just check it out at PCC this weekend

Sent from my DROIDX using Tapatalk 2

[v84x4]

That angle in the video is insane

Is that angle even possible ?

It looks fake
You must have "PhotoShop" it

I need 2 sets Please

Regards Rick

[xingfuderen]

are they the same materal as the old super 300？

[SDS Customz]

Originally Posted by v84x4

That angle in the video is insane

Is that angle even possible ?

It looks fake
You must have "PhotoShop" it [COLOR="rgb(0, 255, 255)"]I can barely take pics let alone try and photoshop them.![/COLOR]

I need 2 sets Please

Regards Rick

Originally Posted by xingfuderen

are they the same materal as the old super 300？

Yes 300m is far superior to anything else out there when it comes to axle shafts. Therefore there is no other material I will use.

[The Violator]

Originally Posted by krawlfreak

Maybe ask for a picture instead if you don't understand....

If you put up a pic before it is available for actual sale on this forum ( hell maybe even after ) someone will copy it and declare it their own idea.

[TSK]

Originally Posted by The Violator

If you put up a pic before it is available for actual sale on this forum ( hell maybe even after ) someone will copy it and declare it their own idea.

Somebody needs to build themselves a bridge and get over it

[Chris_The_Battery_Man]

Originally Posted by TheSCorpionKing

Somebody needs to build themselves a bridge and get over it

x2

Looks like a high school click has formed around here.

I dont see people giving Dave crap for making a universal shaft with re-buildable u-joints since Dana did it before him

In fact, Highland crawler and myself were doing the universal to berg mod way before these were out....

Obviously HC went MIA, but if anyone would deserve credit, it's me because I was the first one to put universals in a berg

[JeremyH]

Here's a giant cookie for everyone:

(Sorry, I had to take a bite)

Now, can we move on so that I can get some not-wobbly ass shafts in my XR ASAP?!?!

[RcBro]

Now that the high school popularity drama fit is over, here's some pictures as requested.

[SDS Customz]

The later of the above pics is the Axial 8* knuckle to wraith "C" adapter

[JeremyH]

Sweet! Looks good John!