|
| LinkBack | Thread Tools | Display Modes |
11-29-2012, 04:04 AM | #1 |
Pebble Pounder Join Date: Nov 2012 Location: Stoke on trent , England
Posts: 159
| Rc4wd ax2 2 speed bearing's
HI , I just wondered what size bearings are all the ones in the ax2 tranny ? I have heard they break down quite rapidly . Thanks ,Jack |
Sponsored Links | |
11-30-2012, 12:25 AM | #2 |
Newbie Join Date: Sep 2009 Location: birmingham
Posts: 34
| Re: Rc4wd ax2 2 speed bearing's
Jack, havent you got an AX2 tranny, split it apart and tell us |
11-30-2012, 05:50 AM | #3 |
Pebble Pounder Join Date: Nov 2012 Location: Stoke on trent , England
Posts: 159
| Re: Rc4wd ax2 2 speed bearing's |
11-30-2012, 06:11 AM | #4 |
Rock Crawler Join Date: Jan 2007 Location: UK
Posts: 829
| Re: Rc4wd ax2 2 speed bearing's
8 * 11mm x 5mm x 4mm 2 * 8mm x 5mm x 2.5mm |
12-11-2012, 03:47 PM | #5 |
Pebble Pounder Join Date: Nov 2012 Location: Stoke on trent , England
Posts: 159
| Re: Rc4wd ax2 2 speed bearing's |
12-12-2012, 07:47 PM | #6 |
Rock Crawler Join Date: Apr 2012 Location: Chattanooga
Posts: 639
| Re: Rc4wd ax2 2 speed bearing's
I think these are right 5x11x4 Rubber Sealed bearing. MR115-2RS And these http://www.fasteddybearings.com/prod...85%252dRS.html |
12-12-2012, 07:50 PM | #7 |
RCC Addict Join Date: Oct 2009 Location: In the mancave...
Posts: 1,038
| Re: Rc4wd ax2 2 speed bearing's
i tell ya, i ran my scx10 for 2 1/2 years with out ever ripping it apart. and i likes me water and mud . when i finally did open it up, i was surprised to find that the trans bearings were just a lil dirty. a good soaking in a nice lube and they are as good as new, wup, edit, i see ya said the ax2 trans, sorry about that. but if they built it like the scx10 trans you should be good to go lol Last edited by rik; 12-12-2012 at 07:54 PM. |
12-13-2012, 03:15 AM | #8 |
Pebble Pounder Join Date: Nov 2012 Location: Stoke on trent , England
Posts: 159
| Re: Rc4wd ax2 2 speed bearing's
Thanks lad's Merry christmas |
12-13-2012, 05:34 AM | #9 | ||
Rock Crawler Join Date: Jan 2007 Location: UK
Posts: 829
| Re: Rc4wd ax2 2 speed bearing's Quote:
Quote:
| ||
12-13-2012, 06:04 AM | #10 |
RCC Addict Join Date: Jul 2009 Location: reelsville
Posts: 1,871
| Re: Rc4wd ax2 2 speed bearing's
5x8 bearings in a tranny? Following Axial's biggest mistake ever instead of learning from it?
|
12-13-2012, 01:23 PM | #11 |
Pebble Pounder Join Date: Nov 2012 Location: Stoke on trent , England
Posts: 159
| Re: Rc4wd ax2 2 speed bearing's
Never had any problems on my trannys . Thanks guy's "D
|
12-13-2012, 02:59 PM | #12 |
Rock Crawler Join Date: Jan 2007 Location: UK
Posts: 829
| Re: Rc4wd ax2 2 speed bearing's |
Rc4wd ax2 2 speed bearing's - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ax2 ? | Mr Bill | Axial AX-10 Scorpion | 8 | 04-17-2011 11:28 PM |
Thread Tools | |
Display Modes | |
| |