RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   General Crawlers (http://www.rccrawler.com/forum/general-crawlers/)
-   -   what brand spur gears worth with scx10 tranny? (http://www.rccrawler.com/forum/general-crawlers/416900-what-brand-spur-gears-worth-scx10-tranny.html)

jebster 12-09-2012 08:25 AM

what brand spur gears worth with scx10 tranny?
 
i have the stock 87p spur on my tranny but would like to drop down to something like a 84p. i dont see axial selling that size spur gear (they do have a 80p). suggestions? i want to make sure i have one that works with the slipper.

indiana mudcat 12-09-2012 12:05 PM

Re: what brand spur gears worth with scx10 tranny?
 
The white delrin Robinson Racing ones are the best, I tried a Kimbrough once and all the teeth folded over in the first ten feet.

fordsuperduty 12-09-2012 12:08 PM

I run 32 pitch in mine bc I run a brushless vxl setup

EeePee 12-09-2012 12:17 PM

Re: what brand spur gears worth with scx10 tranny?
 
Quote:

Originally Posted by indiana mudcat (Post 4055985)
The white delrin Robinson Racing ones are the best, I tried a Kimbrough once and all the teeth folded over in the first ten feet.

I found the Robinson spurs to be just as brittle as Kimbrough. As in, they shear off. Axials "fold" over as they're softer. In my experience.

White Traxxas gears are where it's at. Not soft, not brittle, just right.

TowerHobbies.com | Traxxas Spur Gear 48P 84T

http://www.gohobbies.com/graphics/TRA/L4684.jpg

jebster 12-09-2012 02:06 PM

Re: what brand spur gears worth with scx10 tranny?
 
Thanks for the recommendations guys. I'll pick up a traxxas spur gear.

Cheatin 12-09-2012 08:27 PM

Re: what brand spur gears worth with scx10 tranny?
 
I went to 32 pitch 60 tooth Kimbrough for RC10 GT, Brood Chaos 35T HHK arm hasn't hurt it so far and clears the MIP shafts.
link:

http://www3.towerhobbies.com/cgi-bin...?&I=LXS396&P=7

Sparky6307 12-13-2012 04:17 PM

http://img.tapatalk.com/d/12/12/14/bapeseru.jpg


Traxxas rustler,slash

The only thing is you have to do the whole slipper assembly

Total it cost about $25


iPhone4


All times are GMT -6. The time now is 04:36 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com