tuber out of hangers I am building my own chassis thanks to gimbal but untill i get the tools to build it i want to build a roll cage or something like a tuber to fit the body over im using the hpi ford 73 bronco i stared doing this earlier today and when i got the basic layout and went to sodering it i wasnt able to my question is whatever the clotheshangers are made out of is it possibel to soder it together? |
Re: tuber out of hangers why in the world are you using clothes hangers? 8O 8O :?: |
Re: tuber out of hangers Quote:
|
Re: tuber out of hangers Even if you could, it would have to be a pretty elaborate web of hangers. And it would probably bend easily in hard rollovers. Maybe for a Venom VMG? |
Re: tuber out of hangers i chose the clothe hangers cuz its easy to bend cand i alreay have it. can i t be sodered to gether and im also doing this as a mock up of a tuber. |
Re: tuber out of hangers weld it or braze it :D but if your mainly doing it for mock up, just use straws ( bendable straws preferably) then just tape them or glue them together. i say the straws will hold up longer to the abuse :flipoff: |
Re: tuber out of hangers You've got tube coathangers? :flipoff: If you're trying to solder coathanger wire together, you'll have to sand off the coating that's on them...then you might be able to silver solder them together. You might as well just go get some 3/16" brake tubing, a MAPP torch, and some safty-silv and start a real tuber. :wink: |
Re: tuber out of hangers Jason, can you conciously recomend a torch? I mean this is how wild fires start...really :lol: |
Re: tuber out of hangers Smokey the Bear never built a crawler, either!* :wink: Smokey was a tree-huggin' hippie! |
Re: tuber out of hangers I tried brazing coat hangers once but just ended up with a blob of melted plastic......maybe I should have tried the metal ones. :?: You can play with coat hangers. What works better for mockup is some thick copper electrical wire. You can bend it by hand and solder it with any decent iron. Jay |
Re: tuber out of hangers just JB Weld the hangers together, that will work a lot better than solder, and last forever. |
Re: tuber out of hangers Yo! i just finished making my tuber mock up from hangers! - great minds think alike! anyhoo, i just used masking tape works pretty well got pics if u want em! good luck |
Re: tuber out of hangers this is verrry off topic.. but i know someone mentioned using staws..well use the straws..fill them with some jb weld..and have a really unique frame... |
All times are GMT -6. The time now is 08:24 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com