Go Back   RCCrawler Forums > RCCrawler General Tech > General Crawlers
Loading

Notices

Thread: 4WS Wraith New to me

Reply
 
LinkBack Thread Tools Display Modes
Old 04-30-2013, 08:02 AM   #1
Newbie
 
Join Date: Apr 2013
Location: Lakeside
Posts: 17
Default 4WS Wraith New to me

I'm new to Crawling but not to RC. I came from 1/8 nitro racing. I recently picked up a used 4WS Axial Wraith. I traded for a dx3r which i'm waiting for so I haven't yet got to mess with the rig. I was told it has the ability to crab walk but I'm curious to know what kind of other stuff its capable of doing, and how to unleash those.

Wraith specs:

Redline 13.5 Brushless
Mamba Max Pro ESC
4x 2200 3s batteries
Front battery plate kit
Complete vanquish titanium link kit
Metal trans gears
MIP driveshafts
Custom front and rear lockers
ST-RC aluminum knuckles and c-hubs
2 Hitec 7950 servos
2 Castle BEC's
Delrin beadlock wheels with soft ripsaws
Lowering kit
Spektrum SR3100 3ch Receiver


Thanks for the help.
3ric85 is offline   Reply With Quote
Sponsored Links
Old 04-30-2013, 09:28 AM   #2
I wanna be Dave
 
Join Date: Jan 2009
Location: New Port Richey, FL.
Posts: 2,545
Default Re: 4WS Wraith New to me

Rear steer should be able to go straight, crab, oppose, and adjust the % of rear steer. I can do this on the Futaba 4PL, just not sure on yours.
Johnnysplits is offline   Reply With Quote
Old 04-30-2013, 10:09 AM   #3
Rock Stacker
 
Join Date: Jan 2012
Location: McAdoo
Posts: 75
Default Re: 4WS Wraith New to me

Well its got all top shelf parts on it....
RickGrimes is offline   Reply With Quote
Old 04-30-2013, 10:09 AM   #4
RCC Addict
 
Join Date: Jul 2012
Location: Oreganastan
Posts: 1,151
Default Re: 4WS Wraith New to me

Rear steer depends on how you set it up.

I have a friend with rear steer on a toggle switch that is not proportional, 1 position rear steers max left, center pos is centered & last position rear steers max right.
This is one way that allows you to have rear only steering (not proportional)

Mixing your rear steer servo with the front steering servo will give you proportional rear steer (follows front steering) but you will have to pick the rear following front or opposite front & it will be full time.
With that radio (3 pos or 2 pos 3rd channel) you can use a heyok controller that will allow you to switch from locked rear to crab (proportional) to opposite (proportional) with your 3rd channel.
The Heyok set up looks like the best most economical & versatile set up I can find for the basic
4 Wheel Steering Controller

Manual for radio
http://www.spektrumrc.com/ProdInfo/F...-Manual_EN.pdf

Last edited by Dostradamas; 04-30-2013 at 10:18 AM.
Dostradamas is offline   Reply With Quote
Old 04-30-2013, 10:13 AM   #5
Newbie
 
Join Date: Apr 2013
Location: Lakeside
Posts: 17
Default Re: 4WS Wraith New to me

I was looking at the heyok controller and was prob going to get it. do you buy the whole controller from him or just use my controller and his harness? I'm kinda lost on that
3ric85 is offline   Reply With Quote
Old 04-30-2013, 10:45 AM   #6
RCC Addict
 
Join Date: Jul 2012
Location: Oreganastan
Posts: 1,151
Default Re: 4WS Wraith New to me

Quote:
Originally Posted by 3ric85 View Post
I was looking at the heyok controller and was prob going to get it. do you buy the whole controller from him or just use my controller and his harness? I'm kinda lost on that
Heyoks controller plugs into the receiver & the servos/bec plug into it.

Look through the threads & there should be more detailed wiring & setup.
Dostradamas is offline   Reply With Quote
Old 04-30-2013, 10:52 AM   #7
RCC Addict
 
Join Date: Jul 2012
Location: Oreganastan
Posts: 1,151
Default Re: 4WS Wraith New to me

It would not be a bad idea to just plug the rear servo into your bnd port.
When you power on the servo will center & hold there until turned off.
If you do something like this you can run with the setup you have only steering in the front for a while and see if you want 4ws. Many want it till they drive with it then toss it.
Couldn't hurt to wait a bit before diving into the 4ws.
I change my mind & set up for a while till I get what I want (often far from what I started out wanting.)

Last edited by Dostradamas; 04-30-2013 at 10:55 AM.
Dostradamas is offline   Reply With Quote
Old 04-30-2013, 11:18 AM   #8
Newbie
 
Join Date: Apr 2013
Location: Lakeside
Posts: 17
Default Re: 4WS Wraith New to me

Good info. I only driven a moa crawler for a second So to get a feel for it thats a great idea. I really appreciate this info. I'm waiting on a servo case and my controller I'm getting tomorrow and well give her a go and see what i like.
3ric85 is offline   Reply With Quote
Reply



4WS Wraith New to me - Similar Threads
Thread Thread Starter Forum Replies Last Post
NEWB HELP 4WS Wraith 3ric85 Newbie General 0 04-30-2013 07:49 AM
ROJO's 4WS Wraith rojo Axial Wraith 117 01-02-2013 03:26 PM
dig or 4WS wraith? rainman Newbie General 7 04-21-2012 10:48 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 08:59 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com