Go Back   RCCrawler Forums > RCCrawler General Tech > General Crawlers
Loading

Notices

Thread: Loose front axle causing "chugging"

Reply
 
LinkBack Thread Tools Display Modes
Old 09-23-2013, 09:19 AM   #1
Newbie
 
Join Date: Jun 2013
Location: Trenton
Posts: 12
Talking Loose front axle causing "chugging"

Hey fellas,

I have don't pretty well with my 2012 Jeep Rubicon RTR since I got it. I came over to the crawling scene from racing SCTs and Buggies so it was quite a change. But now I'm having this problem that has me kinda puzzled: my front axle seems to be loose and is causing the truck to have trouble steering as well as it's making a "chugging" sound as it goes. I've narrowed it down to the Y bracket that connects the chassis to the top of the front axle, but I have no idea what to do to fix it....


Is this a part I must replace?

If so would the aluminum upgrade kit include the piece I need??

I tried to find the answer by googling it and also checked with some folks on Facebook that are big time scale/crawler guys, but no straight answers so far. Thanks a lot for any help provided.
DarkShadowMastr is offline   Reply With Quote
Sponsored Links
Old 09-23-2013, 10:22 AM   #2
Proverbial threadkiller
 
Trubble's Avatar
 
Join Date: Feb 2011
Location: Central Wisconsin
Posts: 1,453
Default Re: Loose front axle causing "chugging"

Quote:
Originally Posted by DarkShadowMastr View Post
I've narrowed it down to the Y bracket that connects the chassis to the top of the front axle, but I have no idea what to do to fix it.... Is this a part I must replace?
Check out 3Racing's Upper Link Mount, if you're looking to stay with the 3-link setup.

Or pick up Axial's 80043 parts tree and use the truss to convert to 4 link if you have room under the steering servo plate.

Quote:
Originally Posted by DarkShadowMastr
If so would the aluminum upgrade kit include the piece I need??
Don't remember the deets on that right offhand, but I'm fairly certain it only comes with the aluminum tubing and maybe if you're lucky, a small Y connector to stay 3 link. But it doesn't really fix your slop problem until you replace either the ball or the socket bolted to your axle. IIRC, neither is included with the AL kit.




.
Trubble is offline   Reply With Quote
Old 09-24-2013, 05:04 PM   #3
Quarry Creeper
 
Join Date: Oct 2004
Location: Cow crap flats
Posts: 341
Default Re: Loose front axle causing "chugging"

it is wear in the piece that is on the axle, that the link attaches to. last night i was looking at this same issue. the cure was a washer on each side of of the bracket and a small rubber oring on each side. as far as the chugging i would look inside the axle at the ring and pinion gears for proper mesh. mine had loosened up and required shimming to correct.
envious8420 is offline   Reply With Quote
Old 09-24-2013, 08:27 PM   #4
RCC Addict
 
Join Date: Jul 2008
Location: San Diego
Posts: 1,144
Default Re: Loose front axle causing "chugging"

4 link that thing front and rear. The cheapest way is the Truss list above. The truck will be more stable. Use Traxxas part# 1942 for the link ends. Good luck
Matt
SDheavymetal is offline   Reply With Quote
Old 09-25-2013, 05:36 PM   #5
Quarry Creeper
 
Join Date: Oct 2004
Location: Cow crap flats
Posts: 341
Default Re: Loose front axle causing "chugging"

I saw a youtube vid showing the axle chugging/jerking and the fix was to correct driveshaft alignment, not only the the marks on the shafts but also the pins in the ujoint/cv end.
envious8420 is offline   Reply With Quote
Old 09-25-2013, 10:13 PM   #6
Newbie
 
Join Date: Jun 2013
Location: Trenton
Posts: 12
Default Re: Loose front axle causing "chugging"

Well I was feeling all warm and fuzzy inside until you just said that.....
Cuz I just finished putting MIP Hardened Steel driveshafts on my rig. Could I have caused this problem myself?? Now I'm afraid I caused it. Dang it!
DarkShadowMastr is offline   Reply With Quote
Old 09-26-2013, 08:37 AM   #7
Quarry Creeper
 
Join Date: Sep 2013
Location: Hicktown
Posts: 299
Default Re: Loose front axle causing "chugging"

My Honcho was doing this. There is a ball socket similar to what goes on the link ends, shock ends, etc. Mine had pulled through the axle truss. Tore it all down and put it back to find that it was still loose. Find one of those ball sockets in your spare parts bag. You should have one that just barely fits. When you go to screw the y link to the truss it should pull the socket into the truss housing. Dont over tighten the screw or it will make the suspension extremely tight and not allow it to travel
1fox2go is offline   Reply With Quote
Old 09-26-2013, 03:21 PM   #8
Quarry Creeper
 
Join Date: Oct 2004
Location: Cow crap flats
Posts: 341
Default Re: Loose front axle causing "chugging"

Axial SCX10 Dingo Axle Chatter & Fix - YouTube


edit- I did mine as the vid showed. butter smooth now.

Last edited by envious8420; 09-26-2013 at 08:16 PM.
envious8420 is offline   Reply With Quote
Reply



Loose front axle causing "chugging" - Similar Threads
Thread Thread Starter Forum Replies Last Post
Weird "chugging" in reverse? Shadow Fox General Crawlers 18 07-27-2014 10:56 AM
Just build my xr10 - First run, front axle "clicks"? eddiepfund Axial XR10 9 10-06-2010 06:25 AM
source for loose NIMH "C" cells Jeep-Power Electronics 4 06-24-2010 02:39 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 09:12 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com