Which shafty solid axle is best suited to run Jumbo Kongs?

[BoilermakerFan]

Looking at a project truck running a T600 motor, an E-Maxx tranny, and REVO shafts. Which axle would best handle the stress of a set of Jumbo Kongs; TXT-1, Twin Force, or X-Factor axles?

The center diffs would be replaced with lockers or locked via JB Weld if there aren't any lockers for the X-Factor axles.

[DirkDigler]

xfactor or twin

[Nitro]

I would use the Force or the X Factor axles, the txt are strong, but they will let go at the end of the dog bone at the steering knuckle!

But that is just what I think, you can break anything!

[bigred]

x factor twin or hybrid maxx axels but do not run maxx sliders for axels with kongs.

[BoilermakerFan]

Thanks Guys.

Nope, no Maxx sliders. I run Maxx sliders on my TLT-10.

The shafts will be REVO shafts or possibly CVDs, but I'll start with REVO shafts.


I need to search a bit more, but I don't like the stock servo mount for the X-Factor axles with the huge skid plate. I did think the X-Factor axle would hold up better though since it's designed for a .25 nitro engine and the shock of the clutch engaging.

[TwistedCreations]

i would run a Maxx hybrid axle with CVD's.. i run mine with LST's and have beat the livin crap out of it and still haven't broke anything on the axles( knock on wood)

if ya made a Maxx hybrid axle, to fit the CVD's you would want the WMS-WMS at 13"

just some measurement info for ya that is if you didn't use the stock a-arms. mine are made basically from 1/4" solid rod

[BoilermakerFan]

Originally Posted by TwistedCreations

i would run a Maxx hybrid axle with CVD's.. i run mine with LST's and have beat the livin crap out of it and still haven't broke anything on the axles( knock on wood)

if ya made a Maxx hybrid axle, to fit the CVD's you would want the WMS-WMS at 13"

just some measurement info for ya that is if you didn't use the stock a-arms. mine are made basically from 1/4" solid rod

I'm kicking that idea around since you can build a pretty bulletproof drivetrain with UE, RRP, and Kipster parts for the Maxx.

[skyjacker_rc_club]

Id go with Xfactor axles i have seen CVDs snap. 8O

[fastmaxxcooper]

i say go with mad force axles unless they are the same as xfactor axles