losi night crawler 4wheel steering
 

Has anyone done this before?

does anyone know what all I need or how to do it?

I want to do a 4 wheel steering setup on a Night Crawler just to play around with.

I searched the internet try to find out but really was not having much luck

I know I need LOSB2046 and another servo

Do I need a servo signal reverser?
https://www.hobbyking.com/hobbyking/...dProduct=34113

Do I need a Y connector?
http://www.hobbyking.com/hobbyking/s...5pcs_bag_.html

What radio do I have to use? I have a DX3S will that work?

Any help would be greatly appreciated
Thanks<!-- google_ad_section_end -->

Re: losi night crawler 4wheel steering
 

- You don't need a reverser. You can either reverse in the radio if using 3rd channel or by reversing the motor and potentiometer wires inside the servo.

- With a Y connector you will have permanent rear steering and don't need a third channel.

- With the DX3S, that I don't know well, you might be able to program the rear steering to be on/off by control of the auxillary switch.