SCX10 Shocks Build So my friend asked me to build him a really nice set of SCX10 Shocks for one of his Comp rigs so here's what I am building for him... Parts list: ~RCBros Eggressor Shock Bodies ~RCBros Aluminum Shock Caps ~Notch Eight Designs SCX Shock Collars ~Jeepindoug Springcups ~Titanium Shock Shafts ~Axial Machined Pistons ~Traxxas Shock Rebuild kit TRA2362 (2) ~HPI 9x3.5mm Shock Bladder HPI87065 http://i1177.photobucket.com/albums/...ps2bae3d5a.jpg These Aluminum Shock caps are super nice really good machining perfect fit just like all RCBros products "thumbsup" http://i1177.photobucket.com/albums/...ps31ef341c.jpg First thing I did was drill out the shock caps for bleeding the shocks. http://i1177.photobucket.com/albums/...ps4aedaacc.jpg Next I installed the HPI Shock Bladders in the caps. http://i1177.photobucket.com/albums/...ps5d9f6bfe.jpg http://i1177.photobucket.com/albums/...psf26ff73d.jpg Finished shock caps http://i1177.photobucket.com/albums/...psd0870659.jpg Next thing were the shock bodies from RCBros. Like the shock caps amazing machine and everything is perfect on them. http://i1177.photobucket.com/albums/...psd9cbf5f1.jpg Installing the Traxxas Shock kit was easy except the C-Clips :ror: Small thin plastic washer Xring seal Thick white spacer Xring Seal Large thing plastic washer C-clip http://i106.photobucket.com/albums/m...r.jpg~original http://i1177.photobucket.com/albums/...pse2b5b89e.jpg Put the Caps and collars on the shocks and they are done for now just waiting on the Ti Shafts and Machined Pistons. http://i1177.photobucket.com/albums/...ps131afca6.jpg The Notch Eight Shock collars are super nice. They have a nice snug fit over the shock bodies and you can get them in different colors "thumbsup" http://i1177.photobucket.com/albums/...ps7910b7c1.jpg |
Re: SCX10 Shocks Build Very nice write up Everett. Looking forward to checking out the shafts when you get them. |
Re: SCX10 Shocks Build Good stuff EY! See world, I'm not the only guy who gets folks to make my stuff when need be;) |
Re: SCX10 Shocks Build Updates? "thumbsup" Who's making the shafts? |
Re: SCX10 Shocks Build Quote:
Shafts finally showed up after spending almost 4 weeks en route to me... The fit and finish on these is amazing and they are super smooth "thumbsup" I got them and installed the Axial Machined Pistons on them which went on easily and fit perfectly. http://i1177.photobucket.com/albums/...ps510a19cd.jpg http://i1177.photobucket.com/albums/...ps7d706081.jpg http://i1177.photobucket.com/albums/...ps8f3a8329.jpg Next I installed them and filled the shocks with oil and bled them... I installed the Jeepindoug spring cups and MRC Silver Springs. (Didn't have Mini-T Silvers) http://i1177.photobucket.com/albums/...ps71903727.jpg http://i1177.photobucket.com/albums/...ps67654b1e.jpg http://i1177.photobucket.com/albums/...pse51f909f.jpg |
Re: SCX10 Shocks Build Sweet build detail. |
Re: SCX10 Shocks Build Do you have weight comparisons of all these fancy parts? |
Re: SCX10 Shocks Build Quote:
Quote:
|
Re: SCX10 Shocks Build Do you have a ball bark on the cost of them? |
Re: SCX10 Shocks Build The shock bodies alone are near $100. This is definitely not a cheap route for shock absorbers |
Re: SCX10 Shocks Build Quote:
Quote:
|
Re: SCX10 Shocks Build ^ you're right! it's been a while since I looked at this option. The shock bodies used to be $45 per pair (on sale). I remember because I was given $100 from my parents for my birthday and looked to buy a set all four would have wiped out my cash. I decided to go another route. |
:shock: Sent from my VS980 4G using Tapatalk |
Re: SCX10 Shocks Build Quote:
Quote:
|
That is very clean they been put to the test yet? What weight oil you running Sent from my HTC6600LVW using Tapatalk |
Re: SCX10 Shocks Build Quote:
|
Re: SCX10 Shocks Build Quote:
|
All times are GMT -6. The time now is 02:42 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com