03-31-2014, 11:40 PM | #1 |
Pebble Pounder Join Date: Dec 2013 Location: Arkansas
Posts: 115
| Need help!!
I have an axial ax10/wraith conversion, and the servo (tried other servos) just goes crazy. It makes the noise like when its turning when its not and it wont turn at all. What can I do to fix it?
|
Sponsored Links | |
04-01-2014, 12:04 AM | #2 |
Quarry Creeper Join Date: Apr 2012 Location: lake wylie
Posts: 308
| Re: Need help!!
Do you have an external BEC? Or if you do check to see if the servo horn is stripped out. Very possible if you are using a plastic horn. If so upgrade to aluminum.
Last edited by slim_chance; 04-01-2014 at 12:08 AM. |
04-01-2014, 09:06 PM | #3 |
Rock Crawler Join Date: Jan 2008 Location: Lehigh Valley, Pa
Posts: 768
|
It sounds to me like you have stripped a servo gear out. Your best bet is to upgrade the servo to something new . There are lots of options in tons of different vendors. Reliable cheap servo seems to be a solar d772 from hobbypartz or good servo like hitc or savor you can get from rpphobby. In my opinion I wouldn't bother replacing the gears in your stock servo. Good luck |
04-02-2014, 11:08 AM | #4 | |
I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| Re: Need help!! Quote:
| |
Thread Tools | |
Display Modes | |
| |