Giveaway - JC Auto Design Scale Tech Disk Brake Spacers

[monkeyracer]

Information on these can be found here:
JCAD Scale Tech Disk Brake Hub Spacers

---

In order to celebrate the launch of the Scale Tech line of products by JC Auto Design, I figured I would give some of these away.
Through the Scale Tech line of products, there will be more cool things coming very soon, such as the Wraith Scale Rails and the MXR Axle housings, etc.

Giveaway details:
I'm giving away 5 sets of these. That means there will be 5 winners. Your chances of winning are now 5 times better!

I will pick the first winner based on the picture they post. The remaining winners will be picked using a random number generator. The first winner gets their choice of thickness from the sizes I have. Second winner gets second choice, etc. Two runners-up will be chosen in the case that a winner does not contact me with their preference and shipping address in time. Winners are contacted by PM.

The winners will each receive one set of (4) Disk Brake Spacers.

The giveaway starts now, and ends 04/30/14 at 11:59:00 Mountain Standard time. Entries after this time frame will be ignored. Winners will be announced by 05/04/14.

To enter:
Simply post a picture (only one picture) of your rig with SLW compatible wheels that would look great with a set of these behind them. (If you don't have the wheels yet, but are planning on getting SLW wheels, post up the rig that they will go on. Remember that stock PSC Wraith wheels are SLW compatible...) If you would like to post a short caption or comment, feel free to do so.

For the winning picture, I will be looking for uniqueness, originality, creativity, and overall composition. I want to see some cool rigs in a cool picture that shows off your hard work (or hard earned money to pay someone to do the work...)

Only one post allowed per forum member. Duplicate posts will result in disqualification from this giveaway.

You must be a star holding forum member to enter the giveaway (star must be shown on your profile by the last day of the giveaway).
Don't have a star? Click here to find out how to get one.

International entries will be accepted, and I will cover the extra cost of shipping, as long as it doesn't exceed $10 or require special customs forms.

Good luck, let's see those rigs!

[fr8cture]

Even though first usually never wins, I'm in for the chance. Looks like a sweet product.

Here's my rig, currently no wheels. Traded with a guy deal when bad and basically ran away with my wheels.

[djjiz]

[muddywaters]

These are my RC4WD Steelies that are mounted on TSL XL's with locked up rc scale acorn nuts and will be modded to have the SLW hub. My rig will be the Defender D90 that's heading to Hoosierdadys chop shop to be turned into a D90 pick up truck.

[ssdub33]

Now will have slw compatible locked up rock cutter wheels will zinc hardware but I need brake discs to finish up the last of my scale items

[joshsmith512]

my class 3 would look good with these

[MIKO]

Nice!

[TrailSnail]

Some nice disk brakes would be the perfect motivation to upgrade my wheels too...

[CODYBOY]

Here is my Hammer on our home course.

[hotrodsonoma]

Thx for the chance.
And what are SLW's?


Would love these on any of my few rigs.

[Erbing]

[JesterSpec]

Those are really nice!

[Drail]

please count me in and thanx for the chance

[Jslick]

In, thanks forthe chance.

[gbean]

This was a good time to have good brakes...
Thanks for the sweet giveaway!

[badhoopty]

thanks for the chance. this rig would definitely stress test them...

[frdtrkguy]

In, my rig

[DIRTSLINGER]

a nice set of rotors would give my scale comp truck the finishing touch!

[Super]

Would love a set of those.

[DRV KRAWLER]

Please put in !




Sent from my iPhone using Tapatalk