Go Back   RCCrawler Forums > RCCrawler General Tech > General Crawlers
Loading

Notices

Thread: questions about screws for chassis...

Reply
 
LinkBack Thread Tools Display Modes
Old 06-04-2014, 11:26 AM   #1
Quarry Creeper
 
Join Date: Jan 2014
Location: canada
Posts: 196
Default questions about screws for chassis...

I made some chassis plates nothing special. got the skid plate made up.

I need to buy a new drill bit to drill out the holes for the rod ends.

I figure revo ends. what should I get 3mm holes or 4mm.. and what size drill bit should I get to start the holes, I figure I will just use self tapping screws through the balls into the skid..

thanx
iDC5 is offline   Reply With Quote
Sponsored Links
Old 06-04-2014, 02:52 PM   #2
I wanna be Dave
 
Join Date: Jul 2009
Location: Rancho Relaxo. California. USA. Earth.
Posts: 3,292
Default

If you're talking about through the hollow ball yes 3mm. However I'd make the chassis side hole 1/8" and threaded side in the skid 3/32" (2.4mm), if I'm visualizing your skid correctly. This allows the 3mm screw to pass through the chassis rail/side of the skid and thread into the center portion.

Hope that makes sense...
Meatwad is offline   Reply With Quote
Reply



questions about screws for chassis... - Similar Threads
Thread Thread Starter Forum Replies Last Post
binder screws vs standard screws for plastic Meatwad Tools, and Procedures 9 10-03-2019 01:20 PM
what size screws are spur screws? STANG KILLA SS General Crawlers 3 10-09-2009 07:24 PM
KK chassis screws? rockassassin EnRoute Berg 2 03-04-2009 07:40 AM
chassis questions grizzly crawler Losi Mini-Rock Crawler 1 10-12-2008 11:49 PM
chassis questions mobil1syn Tamiya TLT Crawlers 3 02-16-2007 06:28 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:54 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com