What is the best HD locker for a Maverick scout

[PSH72]

Witch of this two is the best locker

http://www.rpphobby.com/product_p/hotscp125r.htm

Vanquish Products Alu Diff Locker Axial AX10 SCX10 Wraith Deadbolt AR60 Crawler



Our is there a beter one and cheaper?

[fr8cture]

Get lockedup rc FI spools

Sent from my VS980 4G using Tapatalk

[Jslick]

My Locked Up RC spools have taken a beating this season between all our comps, trail runs and the first Axial Eastcoast G6. They have not had a single issue.

[Szczerba]

Holmes Hobbies is now making their own Chromoly lockers. Phased and out of phased too.

Regular
Holmes Hobbies LLC

Phased of those running universal shafts
Holmes Hobbies LLC

[fr8cture]

Originally Posted by Szczerba

Holmes Hobbies is now making their own Chromoly lockers. Phased and out of phased too.

Regular
Holmes Hobbies LLC

Phased of those running universal shafts
Holmes Hobbies LLC

Why would universal shafts have a different locker?

[Szczerba]

Originally Posted by fr8cture

Why would universal shafts have a different locker?

Has to do with running universal axle shafts and full lock steering situations. Universal's rotate in an elliptical pattern and its best if they are lined up. If not, you can have some issues with each front tire(universals) rotating in different patterns. It is really seen in the 1:1 world.
So, phased lockers fix all that and get both uni's in sync.

I have been noticing my 4WS XTV crawler rig exhibiting some of this rotation issue while full lock front and rear. So, I will probably try a set before too long. Dialing back the EPAs can help. Remember, this is for universal shafts, CVDs are CVDs.

JRH can probably explain it better than me.

[fr8cture]

Originally Posted by Szczerba

Has to do with running universal axle shafts and full lock steering situations. Universal's rotate in an elliptical pattern and its best if they are lined up. If not, you can have some issues with each front tire(universals) rotating in different patterns. It is really seen in the 1:1 world.
So, phased lockers fix all that and get both uni's in sync.

I have been noticing my 4WS XTV crawler rig exhibiting some of this rotation issue while full lock front and rear. So, I will probably try a set before too long. Dialing back the EPAs can help. Remember, this is for universal shafts, CVDs are CVDs.

JRH can probably explain it better than me.

So if using a axial universal run those but cvd use normal?

[Szczerba]

Originally Posted by fr8cture

So if using a axial universal run those but cvd use normal?

Or a wraith uni, like I run. I would say yes but again, I have limited knowledge but I do think I understand the concepts.

[fr8cture]

Originally Posted by Szczerba

Or a wraith uni, like I run. I would say yes but again, I have limited knowledge but I do think I understand the concepts.

Interesting maybe I will get a set for my shortened xr10 unis in my scx curries. DOes it matter which one is used in the rear?

[djjiz]

Originally Posted by fr8cture

Interesting maybe I will get a set for my shortened xr10 unis in my scx curries. DOes it matter which one is used in the rear?

Nope.

[JohnRobHolmes]

I don't think there are any true cvd's on the market. Mip cvd's are just inside out unis, cvd is their trademarked brand name and nothing more.


Out of phase unis will cause a shimmy at full lock and higher speeds. Don't think many people would ever notice or need phased ones, but we made a few to test the waters.

[PSH72]

Originally Posted by Jslick

My Locked Up RC spools have taken a beating this season between all our comps, trail runs and the first Axial Eastcoast G6. They have not had a single issue.

Will the Locked Up RC spools fit the Maverick scout?