in search of 5mm rear scx10 axles i have vanquish vvd that have 5 mm axle nut shafts . i am looking for rear axle shafts that are 5mm to match the front . i dont want 5 mm front and 4mm rear due to ocd . stock axle shafts are 4mm . looking for help . i have three sets of vvd so i will need three sets of rear axles. any help would be great . i cant believe vanquish makes 5 mm front but not a rear. |
Re: in search of 5mm rear scx10 axles I could be wrong but I thought I saw (I'm not searching 19 pages, you can do that) that Creeper Bob will do a HD titanium axle (5mm) on request. http://www.rccrawler.com/forum/axles...shafts-19.html |
Re: in search of 5mm rear scx10 axles Or you could buy the 4mm stubs from VP and run those instead of the 5mm in front. That's what I did when I got tired of 2 different sized wheel nuts on my rig and realized that there was no need for the 5mm stub. http://www.lockeduprc.com/Vanquish-P...aft_p_569.html Sent from my iPad using Tapatalk |
Re: in search of 5mm rear scx10 axles Quote:
Quote:
|
Re: in search of 5mm rear scx10 axles :twisted: Or .... 5mm Scale front hubs: Ultra Hubs - Front M5 http://www.lockeduprc.net/accessories/ultrahub/ft.jpg And 4mm Scale rear hubs: Ultra Hubs - Rear M4 http://www.lockeduprc.net/accessories/ultrahub/rt.jpg That way you can easily tell them apart ... and everything looks awesome. "thumbsup" |
Re: in search of 5mm rear scx10 axles Quote:
I have been running Bobs shafts without issue for years. |
Re: in search of 5mm rear scx10 axles Quote:
|
Re: in search of 5mm rear scx10 axles Good hardened steel is in fact stronger then titanium. I see a lot of guys on here that think titanium is indestructible and the strongest metal available. The appeal of titanium is the strength to weight ratio. Its just a hair heavier the billet aluminum but much stronger. When it comes to 5mm axle shafts either one should be plenty strong. Maybe with a heavy rig, oversized 2.2 tires, big power and a mean trigger finger they could break but under normal driving they will both be great. Sent from my ALCATEL ONE TOUCH Fierce using Tapatalk |
Re: in search of 5mm rear scx10 axles I've got 3 sets of the ti shafts from creeper Bob and never had an issue. |
All times are GMT -6. The time now is 04:50 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com