2.2 honcho

[Bradley F250 honcho]

I have put 2.2 bf Goodrich krawler ta and 90 mm gmade shocks on it. I am having the hardest time getting the right link kit to fix my binding issue. The angle up at the trans. Is horrible. Is there anyone with a honcho and similar mods. That has found a solution for this issue? Thanks please help getting expensive throwing parts at it

[TacoCrawler]

sure yer installing the links properly ?

pictures would be helpful

[cmbscx10]

Originally Posted by Bradley F250 honcho

I have put 2.2 bf Goodrich krawler ta and 90 mm gmade shocks on it. I am having the hardest time getting the right link kit to fix my binding issue. The angle up at the trans. Is horrible. Is there anyone with a honcho and similar mods. That has found a solution for this issue? Thanks please help getting expensive throwing parts at it

Making true custom links with exact measurements on a 1/10 scale i used a 100-102mm Turnbuckles like this one http://www.amain.com/rc-cars/hot-bodies-4x100mm-turn-buckle-set-2-hbs67806/p86042.
and the rod ends of your choice (Traxxas 5347 to be exact). You can fine tune by less than 1/2mm if you wanted.

[Meatwad]

Get the axle pinion either pointed more up to the trans or closer to the same plane as the trans. As you're finding, the scx platform isn't really made for big tires unless some tinkering is done.

[ussprinceton2004]

RcBros Burly Mud Truck Conversion | RcBros Hobbies