11-26-2015, 08:13 PM | #1 |
Pebble Pounder Join Date: Aug 2015 Location: Oklahoma
Posts: 116
| Currie axle help!!!
Alright guys I've ran into a problem with my front axle. The shafts (stock wraiths) don't fit into the locker and I have major drive train slop because of it. Drives me nuts. Any ideas what the problem could be?
|
Sponsored Links | |
11-26-2015, 10:01 PM | #2 |
Pebble Pounder Join Date: Aug 2015 Location: Oklahoma
Posts: 116
| Re: Currie axle help!!!
I think I fixed it for now. All my slop is in the JunFac driveshafts now. I can deal with that.
|
11-26-2015, 10:02 PM | #3 |
Quarry Creeper Join Date: Oct 2010 Location: Nashville TN
Posts: 347
| Re: Currie axle help!!!
which locker?
|
11-26-2015, 10:07 PM | #4 |
Pebble Pounder Join Date: Aug 2015 Location: Oklahoma
Posts: 116
| Re: Currie axle help!!!
It's the vp locker. The shafts were too short and wouldn't fit in far enough for set screws. I took the bearings out of the ends of the axle tubes and was able to get the shafts to fit and lock in. Won't see any water and the shafts seem ok at this point.
|
Currie axle help!!! - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Currie Axle | GravelDuster | Axial Yeti | 5 | 03-05-2015 01:20 PM |
Currie Axle for XL | busa1320 | Axial Yeti XL | 4 | 03-01-2015 12:07 PM |
vp currie axle | bigboy25 | General Scale Talk | 0 | 01-11-2014 10:25 AM |
Currie axle... | Tbuck | Vaterra Twin Hammers | 3 | 03-13-2013 05:18 AM |
| |