RCCrawler Forums

Maxx4life · 08-24-2005, 07:45 PM

Truck Base : E-maxx

ESC: EVX

Motor(s):Integy 55t Lathe

Servo(s): Hi-tec 645mg

Trans: E-maxx with mod

Axles: locked maxx axel with locked diffs

Tires: hpi savage tires with custom rock rings

WB: 15.5"

Overall Width: ?

Diff clearance: 4"

Center Chassis clearance: 5"

Overall height: 10.5"

colin

Harris · 09-08-2005, 09:43 PM

Truck Base : TLT-1

ESC: Futaba MC330

Motor(s):Multiplex permax /w extra torque sleeve

Servo(s):hitec 645mg

Trans: traxxas 292 magnum

Axles:TLT-1

Tires:Masher 2000 (soon to be moabs)

WB:12 inches

Overall Width:10 inches

Diff clearance:1.5 inches

Center Chassis clearance:3.5 inches

Overall height:7 inches without body, unknown with (has no body currently)

here it is.

peace
harris

TwistedXT · 09-09-2005, 08:46 AM

TwistedXT #1
[IMG]

IMG]
#2

#3
[IMG]

[/IMG]
1st tuber ... puller
[IMG]

[/IMG]
2nd tuber (in the works)
[IMG]

[/IMG]
and Twisted (xt 's little bro)
[IMG]

[/IMG]

mike · 09-14-2005, 09:05 PM

PYRO's MAXX/ txt contraption

Truck Base : highly modded TXT frame

ESC: SR

Motor(s): peramax 600

Servo(s): hightec 5945

Trans: modded TXT, gd- 600- 89:1 gear ratio

Axles: maxx

Tires: lsts or moabs

WB: 17"

Overall Width: 16"

Diff clearance: 3" f/r

Center Chassis clearance: 4"

Overall height: 9 3/8" w/ body

Overall weight: Heavy

danne_jmk · 09-21-2005, 12:28 PM

Truck Base : Modded juggernaut mk1 frame

ESC: Hitech HFX-R

Motor(s): groupner 580 - 600 size

Servo(s): 7,5 kg metal g. bb. (two blue bird 13kg servos comming)

Trans: modded jugg trans with 5:1 extra gearbox

Axles: maxx

Tires: Modded maxx org. imex K-rocks comming soon

WB: 13,7"

Overall Width:

Diff clearance: 3" f/r

Center Chassis clearance: 4,3"

Overall height:

Overall weight:

this is my first crawler so i have alot to lern.

62PYRO · 11-09-2005, 06:36 PM

Truck Base :CLOD

ESC:SUPER ROOSTER

Motor(s):INTEGY LATHE

Servo(s):HI-TEC HS-645MG

Trans:N/A

Axles:CLOD(LOCKED)

Tires:IMEX SWAMP DAWGS

WB:14.75"

Overall Width:13.5"

Diff clearance:1.625"

Center Chassis clearance:4.5"

Overall height:11"

CURRENTLY READY TO GO INTO TRANSFORMATION.

SPECIAL THANKS TO THE SEARCH FEATURE AND GRIZZLY4X4 FOR HELPING ME FIGURE OUT HOW TO RESIZE THE PICS.

Tonsa · 11-25-2005, 04:24 PM

Truck Base : Gecko 60/40

ESC: Novak Super duty XR

Motor(s): 55T Lathes

Servo(s): Hitec digital

Trans: None

Axles: Clod with aluminum lockers both ends

Tires: Imex jumbo swamp dawgs on rear and Imex Claw dawgs on front

WB: 16 1/4"

Overall Width: 15 1/2"

Diff clearance: 2"

Center Chassis clearance: 4 1/2"

Overall height: 13" (with the tall Land Cruiser body)

Rev. Parsley · 11-30-2005, 10:32 AM

Truck base: RS Intruder

Motor: Small- located on rear axle

Servos: Weak (this thing barely turns at all)

Trans: Selectable L/H built into rear axle- Directs power to front via one long *** shaft

Axles: Plastic and apperantly kinda tough cause I've been beating on this thing for 6 years

Tires: RS tractor tread 4" x 2" cut up all crazy on narrowed rims

WB: 7.5"

Width: 11"

Diff clearance: 1.5"

Center chassis clearance: 2"

Overall hight: 8"

Other: replaced AA batteries with 7.2 Nicd , rear 3 link, heavilly cut up chassis and stock body with Testarossa finns removed

This is not a joke. (well it's kind of a joke compred to 99.9% of what I've seen here on RCC) It's been a fun trip modifying this little truck (I think the little Japanese fella who designed it for Radio Shack would s**t if he saw it) and it's a blast to play with but I have to admit that my buddies stock 1/18th nylint smokes it and it's probably time to pick up one of those.

fjp51 · 12-07-2005, 09:29 PM

my ride gecko 2 60/40 pro 55 turn motors 5645 hitec servos 6 cell 3300 batt. lst tires futaba 3pd 3 channel radio novak super duty speed control

mikestoys · 12-09-2005, 07:36 AM

im a total newb, so dont know measurements yet...

Truck Base : TLT

ESC: LRP A.I.

Motor(s): Stock waiting on 55T

Servo(s): Stock

Trans: Stock

Axles: Stock

Tires: Proline Moabs

run2jeepn · 12-16-2005, 03:37 AM

Here are mine not much, but I'm new to the RC seen. But been rock crawling for years.

First one is a 1/18 Nylint dual wheels, cut springs, tummy tuck and painted body.

The second one is a 1/18 Nylint with 2.2's off some radio shack RC ( Free ), flipped rear axle, tummy tuck, Cut front springs, removed rear spring, extend wheelbase 10in, reinforced arms, dovetailed rear, and paint.

jeepbub · 12-27-2005, 06:16 AM

yeah i know, its Independent suspension but i just wanted to post this up for my friend, its a twin detonator with an EVX from an emazz as well as two of the titans out of it as well. locked front and rear diffs as well as shocks from my mega force

RampageFSJ · 12-29-2005, 11:19 AM

Truck Base :XTM X Factor

ESC:What?

Engine: 24.7

Servo(s):stock XF

Trans: stock XF

Axles: stock XF

Tires: stock XF mounted backwards

WB: 15.5 in.

Overall Width: 16.5 in.

Diff clearance: 1.75 in.

Center Chassis clearance: 3.75 in.

Overall height: 12.5 in. with body

Shiffs · 01-08-2006, 03:58 PM

Truck Base : kyosho mad force

ESC: novac evx

Motor(s): tamiya 20 turn

Servo(s): hitec 605mg

Trans: e-maxx

Axles: stock mad force, hardend gears+glued diffs.

Tires: stock mad force kit, cut

WB: 17"

Overall Width: 17"

Diff clearance: 2.25"

Center Chassis clearance: 4"

Overall height: 10.75"

~JaSoN

jamesdezy · 01-16-2006, 04:08 PM

http://i44.photobucket.com/albums/f2...y/101_0927.jpg
http://i44.photobucket.com/albums/f2...y/101_0926.jpg
http://i44.photobucket.com/albums/f2...y/101_0521.jpg

thanks for the paint advise from all who helped

stock more or less
mods are
2-55 turn lathe motors
locked diffs
light weight frame
super rooster esc
adjustable shocks
few other goodies

sllimj · 01-16-2006, 10:00 PM

Truck Base : Clod

ESC: Super Rooster

Motor(s): lathe

Servo(s): titanium front :645 rear

Axles: clod

Tires: Moab

WB: 16"

Started with a clodzilla IV frame, went from there. pretty much a "belly button" of most of the trucks around here.

jdirtmod · 01-26-2006, 12:24 PM

base= custom 55/45
esc= v12
motor= project 35 turn
servo= 113oz hi torque
axle= tlt
tires= 2.2 imex hawgs
wheel base= 15"

RANOVRU · 02-01-2006, 09:50 AM

Truck Base : 1:6 Nylint

ESC: Stock

Motor(s): Stock

Servo(s): Custom

Trans: NA

Axles: Stock-Modified

Tires: Stock

WB: 17.5"

Overall Width: ??

Diff clearance: 2.5"

Center Chassis clearance: 6"

Overall height: ??

RANOVRU · 02-17-2006, 01:09 PM

Truck Base : Maxx

ESC: EVX w/ mod

Motor(s): Twin 55T Integy's

Servo(s): Hobbico CS80

Trans: Maxx w/ 72T spur/9T pinions

Axles: Maxx locked out and spooled F/R

Tires: LST's w/ Velocities

WB: 17.5"

Overall Width: 16.5"

Diff clearance: 4"

Center Chassis clearance: 4.75"

Overall height: 10"

psychofreak · 02-28-2006, 03:27 PM

Well, finally got to take some pics.

Base-NN
ESC-Super Chicken
Motor-55t`s
Servos-HS-645`s
Axles-Clod
Tires/Rims-Zombies on X75`s

09-09-2005, 08:46 AM	#23
TwistedXT Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado Posts: 3,622	TwistedXT #1 [IMG]IMG] #2 #3 [IMG][/IMG] 1st tuber ... puller [IMG][/IMG] 2nd tuber (in the works) [IMG][/IMG] and Twisted (xt 's little bro) [IMG][/IMG]

09-14-2005, 09:05 PM	#24
mike RCC Addict Join Date: Nov 2004 Location: Redding, CA Posts: 1,288	Pud PYRO's MAXX/ txt contraption Truck Base : highly modded TXT frame ESC: SR Motor(s): peramax 600 Servo(s): hightec 5945 Trans: modded TXT, gd- 600- 89:1 gear ratio Axles: maxx Tires: lsts or moabs WB: 17" Overall Width: 16" Diff clearance: 3" f/r Center Chassis clearance: 4" Overall height: 9 3/8" w/ body Overall weight: Heavy Attached Images Last edited by mike; 01-03-2006 at 01:22 PM.

11-09-2005, 06:36 PM	#26
62PYRO Built, not bought Join Date: Oct 2004 Location: Gresham Posts: 4,504	My Truck As Of Now Truck Base :CLOD ESC:SUPER ROOSTER Motor(s):INTEGY LATHE Servo(s):HI-TEC HS-645MG Trans:N/A Axles:CLOD(LOCKED) Tires:IMEX SWAMP DAWGS WB:14.75" Overall Width:13.5" Diff clearance:1.625" Center Chassis clearance:4.5" Overall height:11" CURRENTLY READY TO GO INTO TRANSFORMATION. SPECIAL THANKS TO THE SEARCH FEATURE AND GRIZZLY4X4 FOR HELPING ME FIGURE OUT HOW TO RESIZE THE PICS. Attached Images Last edited by 62PYRO; 11-11-2005 at 06:51 PM. Reason: UPDATED

11-25-2005, 04:24 PM	#27
Tonsa Rock Stacker Join Date: Oct 2005 Location: Salisbury Posts: 88	Tonsa's ride...Never will be finished Truck Base : Gecko 60/40 ESC: Novak Super duty XR Motor(s): 55T Lathes Servo(s): Hitec digital Trans: None Axles: Clod with aluminum lockers both ends Tires: Imex jumbo swamp dawgs on rear and Imex Claw dawgs on front WB: 16 1/4" Overall Width: 15 1/2" Diff clearance: 2" Center Chassis clearance: 4 1/2" Overall height: 13" (with the tall Land Cruiser body) Attached Images

12-07-2005, 09:29 PM	#29
fjp51 Newbie Join Date: Dec 2005 Location: usa Posts: 6	my ride gecko 2 60/40 pro 55 turn motors 5645 hitec servos 6 cell 3300 batt. lst tires futaba 3pd 3 channel radio novak super duty speed control Last edited by fjp51; 12-07-2005 at 10:57 PM.

08-24-2005, 07:45 PM	#21
Maxx4life Pebble Pounder Join Date: Jun 2005 Location: fort bragg, ca (NOR-CAL) Posts: 192	Truck Base : E-maxx ESC: EVX Motor(s):Integy 55t Lathe Servo(s): Hi-tec 645mg Trans: E-maxx with mod Axles: locked maxx axel with locked diffs Tires: hpi savage tires with custom rock rings WB: 15.5" Overall Width: ? Diff clearance: 4" Center Chassis clearance: 5" Overall height: 10.5" colin

09-08-2005, 09:43 PM	#22
Harris Quarry Creeper Join Date: Jun 2005 Location: Mendocino (NOR-CAL) Posts: 282	Truck Base : TLT-1 ESC: Futaba MC330 Motor(s):Multiplex permax /w extra torque sleeve Servo(s):hitec 645mg Trans: traxxas 292 magnum Axles:TLT-1 Tires:Masher 2000 (soon to be moabs) WB:12 inches Overall Width:10 inches Diff clearance:1.5 inches Center Chassis clearance:3.5 inches Overall height:7 inches without body, unknown with (has no body currently) here it is. peace harris

09-21-2005, 12:28 PM	#25
danne_jmk Newbie Join Date: Oct 2004 Location: Jokkmokk sweden Posts: 10	Truck Base : Modded juggernaut mk1 frame ESC: Hitech HFX-R Motor(s): groupner 580 - 600 size Servo(s): 7,5 kg metal g. bb. (two blue bird 13kg servos comming) Trans: modded jugg trans with 5:1 extra gearbox Axles: maxx Tires: Modded maxx org. imex K-rocks comming soon WB: 13,7" Overall Width: Diff clearance: 3" f/r Center Chassis clearance: 4,3" Overall height: Overall weight: this is my first crawler so i have alot to lern.

11-30-2005, 10:32 AM	#28
Rev. Parsley Newbie Join Date: Nov 2005 Location: Marin Co. Posts: 14	Truck base: RS Intruder Motor: Small- located on rear axle Servos: Weak (this thing barely turns at all) Trans: Selectable L/H built into rear axle- Directs power to front via one long * shaft Axles: Plastic and apperantly kinda tough cause I've been beating on this thing for 6 years Tires: RS tractor tread 4" x 2" cut up all crazy on narrowed rims WB: 7.5" Width: 11" Diff clearance: 1.5" Center chassis clearance: 2" Overall hight: 8" Other: replaced AA batteries with 7.2 Nicd , rear 3 link, heavilly cut up chassis and stock body with Testarossa finns removed This is not a joke. (well it's kind of a joke compred to 99.9% of what I've seen here on RCC) It's been a fun trip modifying this little truck (I think the little Japanese fella who designed it for Radio Shack would st if he saw it) and it's a blast to play with but I have to admit that my buddies stock 1/18th nylint smokes it and it's probably time to pick up one of those.

12-09-2005, 07:36 AM	#30
mikestoys Rock Stacker Join Date: Aug 2005 Location: Glendale Posts: 53	im a total newb, so dont know measurements yet... Truck Base : TLT ESC: LRP A.I. Motor(s): Stock waiting on 55T Servo(s): Stock Trans: Stock Axles: Stock Tires: Proline Moabs

12-16-2005, 03:37 AM	#31
run2jeepn I wanna be Dave Join Date: Sep 2005 Location: USA Posts: 11,196	Here are mine not much, but I'm new to the RC seen. But been rock crawling for years. First one is a 1/18 Nylint dual wheels, cut springs, tummy tuck and painted body. The second one is a 1/18 Nylint with 2.2's off some radio shack RC ( Free ), flipped rear axle, tummy tuck, Cut front springs, removed rear spring, extend wheelbase 10in, reinforced arms, dovetailed rear, and paint.

12-27-2005, 06:16 AM	#32
jeepbub Newbie Join Date: Aug 2005 Location: cherry point north carolina Posts: 41	yeah i know, its Independent suspension but i just wanted to post this up for my friend, its a twin detonator with an EVX from an emazz as well as two of the titans out of it as well. locked front and rear diffs as well as shocks from my mega force

12-29-2005, 11:19 AM	#33
RampageFSJ Pebble Pounder Join Date: Mar 2005 Location: Ulysses (In my hick town) Posts: 171	bout time I entered mine. I`ll update it when it`s further modded. Truck Base :XTM X Factor ESC:What? Engine: 24.7 Servo(s):stock XF Trans: stock XF Axles: stock XF Tires: stock XF mounted backwards WB: 15.5 in. Overall Width: 16.5 in. Diff clearance: 1.75 in. Center Chassis clearance: 3.75 in. Overall height: 12.5 in. with body

01-08-2006, 03:58 PM	#34
Shiffs Newbie Join Date: Dec 2005 Location: Rochester, NY Posts: 9	Truck Base : kyosho mad force ESC: novac evx Motor(s): tamiya 20 turn Servo(s): hitec 605mg Trans: e-maxx Axles: stock mad force, hardend gears+glued diffs. Tires: stock mad force kit, cut WB: 17" Overall Width: 17" Diff clearance: 2.25" Center Chassis clearance: 4" Overall height: 10.75" ~JaSoN

01-16-2006, 04:08 PM	#35
jamesdezy Pebble Pounder Join Date: Jan 2005 Location: bradford ,ontario Posts: 102	my txt http://i44.photobucket.com/albums/f2...y/101_0927.jpg http://i44.photobucket.com/albums/f2...y/101_0926.jpg http://i44.photobucket.com/albums/f2...y/101_0521.jpg thanks for the paint advise from all who helped stock more or less mods are 2-55 turn lathe motors locked diffs light weight frame super rooster esc adjustable shocks few other goodies

Sponsored Links

Members' Rides - No talking - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What the #$%#$#@ are ya talking about?	Paul58	Newbie General	10	01-13-2013 04:40 PM
Anybody know what im talking about?!	shadowrejects	Chit Chat	2	05-14-2010 06:26 AM
members 1.1 rides?	SaVaGe MaN SS	Chit Chat	4	03-28-2008 02:48 PM

01-16-2006, 10:00 PM	#36
sllimj Newbie Join Date: Mar 2005 Location: . Posts: 31	Truck Base : Clod ESC: Super Rooster Motor(s): lathe Servo(s): titanium front :645 rear Axles: clod Tires: Moab WB: 16" Started with a clodzilla IV frame, went from there. pretty much a "belly button" of most of the trucks around here. Attached Images

01-26-2006, 12:24 PM	#37
jdirtmod Newbie Join Date: Jan 2006 Location: medford Posts: 7	base= custom 55/45 esc= v12 motor= project 35 turn servo= 113oz hi torque axle= tlt tires= 2.2 imex hawgs wheel base= 15"

02-01-2006, 09:50 AM	#38
RANOVRU Quarry Creeper Join Date: Dec 2005 Location: Mechanicsville, VA Posts: 464	Truck Base : 1:6 Nylint ESC: Stock Motor(s): Stock Servo(s): Custom Trans: NA Axles: Stock-Modified Tires: Stock WB: 17.5" Overall Width: ?? Diff clearance: 2.5" Center Chassis clearance: 6" Overall height: ?? Last edited by RANOVRU; 02-01-2006 at 10:03 AM.

02-17-2006, 01:09 PM	#39
RANOVRU Quarry Creeper Join Date: Dec 2005 Location: Mechanicsville, VA Posts: 464	Truck Base : Maxx ESC: EVX w/ mod Motor(s): Twin 55T Integy's Servo(s): Hobbico CS80 Trans: Maxx w/ 72T spur/9T pinions Axles: Maxx locked out and spooled F/R Tires: LST's w/ Velocities WB: 17.5" Overall Width: 16.5" Diff clearance: 4" Center Chassis clearance: 4.75" Overall height: 10"

02-28-2006, 03:27 PM	#40
psychofreak Newbie Join Date: Jan 2006 Location: SoCal Posts: 40	Well, finally got to take some pics. Base-NN ESC-Super Chicken Motor-55t`s Servos-HS-645`s Axles-Clod Tires/Rims-Zombies on X75`s

RCCrawler Forums

Thread: Members' Rides - No talking