02-06-2016, 12:17 AM | #1 |
Rock Stacker Join Date: Aug 2013 Location: springfield
Posts: 84
| cordless drill gearbox
Well ive searched quite alot and i have found very few results as for what im trying to do, yes i have used the search function but the posts i find are from many years ago and most of there pictures have been deleted. Basically what im looking for is which cordless drills have a 2 speed gearbox that use a 550 motor that is a easy unscrew the motor and put a new one on, I have a 12v and 14.4v dewalt drills but they use the much bigger sized motors and there gearboxes seem awfully big to fit into my scx10. I do love pictures and thanks to anyone in advance that can help me figure this out.
|
Sponsored Links | |
02-06-2016, 10:07 AM | #2 |
Quarry Creeper Join Date: Oct 2012 Location: Oxford
Posts: 248
| Re: cordless drill gearbox
Never seen it done myself but why not!.. If i were you i'd look at the 10.8 volt gear - they have a much smaller body so should be more suitable. My 10.8v dewalt is 2 speed. I know the makitas are aswell. |
02-07-2016, 01:29 PM | #3 |
Rock Stacker Join Date: Aug 2013 Location: springfield
Posts: 84
| Re: cordless drill gearbox
ya ill look into those but i know there has to be more people on here that have some knowledge of the gearboxes or have done this to there rig
|
02-07-2016, 10:44 PM | #4 |
Quarry Creeper Join Date: Dec 2012 Location: Pioneer, 95666
Posts: 397
| Re: cordless drill gearbox
I'm not sure why you'd want to, when the HPI gear reduction box is only $20
|
02-07-2016, 10:52 PM | #5 | |
I wanna be Dave Join Date: Aug 2004 Location: Tri-cities, WA
Posts: 4,831
| Re: cordless drill gearbox Quote:
I remember when the dewalt drill setup was all the rage. It was big, heavy and pretty much worthless in the real world usage. | |
02-07-2016, 11:14 PM | #6 |
Rock Stacker Join Date: Aug 2013 Location: springfield
Posts: 84
| Re: cordless drill gearbox link please to the hpi part and i want the drill gearbox because it has 2 speeds all metal gears and bolts up to a 540/550 motor plus its a custom build and i want the motor up front and have the gearbox look like the transmission of a real truck im not worried about going slow or fast right now as i can always change the gear ratios in the gearbox or use a faster motor and it will add front end weight in a class 1 truck
|
02-07-2016, 11:25 PM | #7 |
MODERATOR™ Join Date: Jul 2004 Location: Ohio
Posts: 18,928
| Re: cordless drill gearbox
I tried to read that in one breath. Barely made it.
|
02-07-2016, 11:30 PM | #8 |
Rock Stacker Join Date: Aug 2013 Location: springfield
Posts: 84
| Re: cordless drill gearbox |
02-08-2016, 05:15 AM | #9 |
RCC Addict Join Date: Jan 2009 Location: Jacksonville Illinois
Posts: 1,049
| Re: cordless drill gearbox
I'd be all for seeing another neat drill gearbox rig. It's been a few years since I seen one and hmmm, I have an old drill sitting around. And axles... Off the the hobby cave!
|
02-08-2016, 09:14 AM | #10 |
I wanna be Dave Join Date: Jan 2004 Location: Austin Texas
Posts: 3,866
| Re: cordless drill gearbox
A drill gearbox is a bad option for our rigs for a number of reasons. Problem one is that the output shafts are typically 1/2" (if I remember correctly). The second issue is that they typically have too much reduction to be put in front of a set of axles. The third is that they're big and are designed to fit in a case, mounting them to anything is not easy. That said, I would start with the cheaper drills like harbor freight. The robotic combat community has a lot of information on using drill gearboxes / motors for drive. Team Tiki also sells them: 19.2 Volt Robot motor – Used |
02-08-2016, 10:06 AM | #11 | |
Quarry Creeper Join Date: Dec 2012 Location: Pioneer, 95666
Posts: 397
| Re: cordless drill gearbox Quote:
here you go: #87634 REDUCTION GEAR BOX SET (WHEELY KING) | |
02-08-2016, 11:43 AM | #12 | |
I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| Re: cordless drill gearbox Quote:
| |
02-08-2016, 11:44 AM | #13 | |
I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| Re: cordless drill gearbox Quote:
| |
02-09-2016, 07:57 PM | #14 |
Rock Stacker Join Date: Aug 2013 Location: springfield
Posts: 84
| Re: cordless drill gearbox
that tf2 tranny is nice but im looking at cheaper options and a 2 speed gearbox is the cheapest atm
|
02-10-2016, 06:11 AM | #15 |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,935
| Re: cordless drill gearbox
There are two speed transmissions from China all over eBay.
|
02-12-2016, 09:06 AM | #16 |
No idea what I'm doing Join Date: Oct 2008 Location: Underground, CO
Posts: 4,529
| Re: cordless drill gearbox
I haven't thought about this thread in a long time: building my own crawler The motor talk starts in a page or two. Is that what you're talking about? |
02-14-2016, 04:19 PM | #17 |
Rock Stacker Join Date: Aug 2013 Location: springfield
Posts: 84
| Re: cordless drill gearbox
yes that is similar to what im referring to but for the the 550 sized gearbox and has two speeds as well
|
cordless drill gearbox - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cordless Drill | dracing10 | Tools, and Procedures | 36 | 09-14-2013 04:04 PM |
1/6 scale jeep with custom cordless drill gearbox | klem klubfoot | Scale Videos! | 2 | 07-31-2012 06:35 AM |
so I had an old cordless drill... | iamsuperbleeder | Electronics | 13 | 11-29-2011 09:18 PM |
Cordless Drill Motor | crawlinthe808 | Electronics | 4 | 11-08-2005 02:24 PM |
| |