Go Back   RCCrawler Forums > RCCrawler General Tech > Newbie General
Loading

Notices

Thread: Help me plz !

Reply
 
LinkBack Thread Tools Display Modes
Old 05-29-2016, 07:21 AM   #1
Newbie
 
Join Date: May 2016
Location: Oslo
Posts: 2
Default Help me plz !

Just started to build Jeep Wrangler SCX 10 with Falken-design.
I'm new to this rc-hobby.
But have trouble with the front end. Plz look at the pic's.
I'm getting frustrated now.
Someone get me tips about this issue ?
In advance, BIG thx's guys. PS. Hope this is the right forum to post.

Pic's :

picload.org | img_20160529_140105.jpg

picload.org | img_20160529_135302.jpg

Last edited by haugen1956; 05-29-2016 at 07:53 AM. Reason: Pictures links...
haugen1956 is offline   Reply With Quote
Sponsored Links
Old 05-29-2016, 07:25 AM   #2
Pebble Pounder
 
Join Date: Oct 2015
Location: Riverview,fl
Posts: 102
Default

Not letting me see pics from my phone. Can you go into detail the issue your having?

Copied and pasted to see. Are the top links on the bottom and bottom on the top? If try swapping them back around and see what happens.

Did you try swapping the links back around to see if that helped? Looks like the top ones are slightly longer that the bottoms. Could just be the pic though.

Also when adjusting them. The bottom links will set your wheel base for the most part and the top one will adjust the angle of the drive shafts. Just what I've learned building mine.

Last edited by THX_138; 07-02-2016 at 09:55 PM.
Betts818 is offline   Reply With Quote
Old 05-29-2016, 07:47 AM   #3
Newbie
 
Join Date: May 2016
Location: Oslo
Posts: 2
Default Re: Help me plz !

Quote:
Originally Posted by Betts818 View Post
Not letting me see pics from my phone. Can you go into detail the issue your having?
Now you can see the pic's
haugen1956 is offline   Reply With Quote
Old 05-29-2016, 09:22 PM   #4
RCC Addict
 
ScaleFreak93's Avatar
 
Join Date: Jan 2011
Location: Bozangeles
Posts: 1,484
Default Re: Help me plz !

I'm assuming you swapped the front 3 link to a 4 link using parts on the part trees, so if thats the case what you did is used links that are way too long for it pushing your axle forward on it's axis slightly as well as affecting the caster which is your steering angle. You can make some shorter upper links with stuff from the hardware store and get everything back into spec
ScaleFreak93 is offline   Reply With Quote
Old 05-29-2016, 09:29 PM   #5
I wanna be Dave
 
Join Date: Apr 2013
Location: Streamwood, IL
Posts: 2,442
Default Re: Help me plz !

Looks like you used lower links on top, try switching them
Mike Flea is offline   Reply With Quote
Old 05-29-2016, 09:40 PM   #6
RCC Addict
 
ScaleFreak93's Avatar
 
Join Date: Jan 2011
Location: Bozangeles
Posts: 1,484
Default Re: Help me plz !

That'll push his wheelbase out even more. Just needs shorter uppers.
ScaleFreak93 is offline   Reply With Quote
Old 05-30-2016, 12:20 AM   #7
waw
Quarry Creeper
 
Join Date: Oct 2012
Location: Malang, Indonesia
Posts: 338
Default Re: Help me plz !

the upper link SHOULD be shorter compared to the lower links

on a rubicon the lower links are 115mm
waw is offline   Reply With Quote
Reply



Help me plz ! - Similar Threads
Thread Thread Starter Forum Replies Last Post
Need help plz scxscaler Axial SCX-10 18 07-29-2013 11:43 AM
help plz davebarlow13 General Scale Talk 2 02-04-2012 04:57 PM
help plz rock and roll cowboy Electronics 2 12-29-2010 01:50 PM
help plz bodybags101 Newbie General 6 12-12-2007 10:30 PM
Need some help plz!! RockinRedneck General Crawlers 3 10-28-2006 11:56 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:55 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com