Ecx barrage axle upgrade
 

I have a ecx barrage, and recently I replace the tiny transmission with a Gmade Komodo crawler tranny. My next upgrade is to change out the front/rear axle. My question is, which axle would maybe close to fit the barrage? I'm looking for not to expensive kind of axle. Any help would be appreciated, thanks.

Re: Ecx barrage axle upgrade
 

How wide are the axles from hex to hex with the wheels removed?

Re: Ecx barrage axle upgrade
 

It's exactly 6" 1/4

Re: Ecx barrage axle upgrade
 

From my notes.

-Yota II/Gelande II - 1/18 -92.2mm
-Yota 180 mm, 7.08 inches
-Scx10 192 mm, 7.56 inches
-Sawback 183 mm, 7.205 inches
-MST cfx 194 mm, 7.638 inches
-Ascender 192mm and can be narrowed to 180mm
-AR60 245mm/9.65"
-Losi MiniRC/SlickRock 140mm/5.51"

Re: Ecx barrage axle upgrade
 

O wow thanks for the info.

Re: Ecx barrage axle upgrade
 

Yeah thanks! That's some GOOD info!

Re: Ecx barrage axle upgrade
 

I installed the MST MSA set and are very pleased with the scale look of them!

https://lh4.googleusercontent.com/hj...=w1825-h912-rw

Re: Ecx barrage axle upgrade
 

O wow I wish u cud post a pic of it.

Re: Ecx barrage axle upgrade
 

just wait for the version 2 barrage axles which are full width without the extended hexes. they should be your cheapest option

Re: Ecx barrage axle upgrade
 

Great info, thanks! 8)"thumbsup"

x2 "thumbsup":)