08-17-2017, 08:13 AM | #1 |
Tire&Foam Extraordinaire Join Date: Jun 2007 Location: C.I. Compound, Tyler, Texas
Posts: 5,601
| *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovations The giveaway winner will be chosen by a random number generator on September 1, 2017. This giveaway is open to any member of the RCCrawler forum. However, Crawler Innovations highly recommends supporting the original website that birthed the RC Crawler hobby into what we have today. If you would like to support RCC, the information about becoming a star holding member is here: click this link. Post once a day to be entered. Crawler Innovations is giving away one set of our 4340 steel, Lightened & Extended front & standard length rear transmission outputs for Axial transmissions. This is a permanent fix to weak outputs. This design incorporates a 5mm round with cross pin hole. These outputs work with any manufacturers drive shafts that are 5mm. These outputs are cut from 4340 "Chrome Moly" steel. They have been lightened by gun drilling the back side of the output, down the center. The 3 piece tab arrangement also reduces weight. These are the lightest and strongest SCX outputs available. The reason the front shaft is longer is to move the drive shaft away from the spur gear. This added clearance allows for the use of larger spur gears in order to gear lower for increased torque & smoother start up. For brushless motors it is critical to ensure a smooth start up with no cogging. They are sold in a set which is one long front and one short rear for $54.95 CWR-5013 They can purchased @: RC Crawler Foams, Rock Crawler Foams, Tires and More by Crawler Innovations RC Crawler Foams, Rock Crawler Foams, Tires and More by Crawler Innovations Here is a set installed on my SCX-10 based 1.9 scale Toyota. I am using a 96 tooth spur gear and 15 tooth pinion on a Tekin 13.5 sensored brushless inrunner motor using a Mamba Max Pro on 4S. The truck is as smooth on start up as my brushed 2.2 comp trucks using Holmes Hobbies hand wound motors. Yes, it's a giant 96T spur gear but the smooth crawlability even with a brushless motor is amazing. Here you can see just how much clearance you have between the output shaft, spur gear and drive shaft yoke. You could actually go bigger if you can find a company that makes a bigger 48pitch spur gear. This pictures shows that the drive shafts clear all link mounting and links. |
Sponsored Links | |
08-17-2017, 08:22 AM | #2 |
I wanna be Dave Join Date: Jun 2016 Location: Austin
Posts: 6,010
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
Awesome! I have a set of your killer foams, please accept my entry...
|
08-17-2017, 08:29 AM | #3 |
Quarry Creeper Join Date: Jan 2016 Location: US
Posts: 401
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
Would love a set! Sent from my SM-G900V using Tapatalk |
08-17-2017, 08:40 AM | #4 |
I wanna be Dave Join Date: Aug 2006 Location: under a rock and a hard place
Posts: 5,443
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
Must have, thanks for thinking of the community.
|
08-17-2017, 08:43 AM | #5 |
Rock Crawler Join Date: Jan 2014 Location: Granite Falls, WA
Posts: 568
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
"Oh, yeaaah." Clint Eastwood, Gran Torino
|
08-17-2017, 08:50 AM | #6 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
Wow, will they work on the wraith Eddie ? Hang up and Drive |
08-17-2017, 08:52 AM | #7 |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,935
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
Thanks for the chance! You make great foams so these should also be great! |
08-17-2017, 08:55 AM | #8 |
RCC Addict Join Date: Nov 2014 Location: Nowhere
Posts: 1,326
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
In, thanks |
08-17-2017, 08:58 AM | #9 |
I wanna be Dave Join Date: May 2011 Location: Lost in Oregon
Posts: 4,450
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
These look great Thanks for the chance |
08-17-2017, 09:29 AM | #10 |
I wanna be Dave Join Date: Feb 2009 Location: Detroit
Posts: 2,075
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
in for a set. these are sweet!
|
08-17-2017, 09:32 AM | #11 |
RCC Addict Join Date: Jan 2016 Location: Kelowna, BC
Posts: 1,274
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
I like that design! thanks for the opportunity..
|
08-17-2017, 09:37 AM | #12 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
Enter me! Thanks
|
08-17-2017, 09:42 AM | #13 |
I wanna be Dave Join Date: May 2010 Location: The east coast
Posts: 2,599
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
Could definitely use a set of these. Count me in. Thanks!
|
08-17-2017, 09:57 AM | #14 |
RCC Addict Join Date: Aug 2008 Location: Paulina
Posts: 1,213
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
In on this. Would love a set for my 6x6 project.
|
08-17-2017, 09:59 AM | #15 |
Pebble Pounder Join Date: Sep 2014 Location: Hamilton Montana
Posts: 135
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
Much want!
|
08-17-2017, 10:17 AM | #16 |
RCC Addict Join Date: May 2015 Location: Price Twp.
Posts: 1,291
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
I'm in, and that is some seriously cool shit.
|
08-17-2017, 10:32 AM | #17 |
Quarry Creeper Join Date: Jun 2013 Location: Canada
Posts: 403
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
Thanks for the chance!
|
08-17-2017, 10:33 AM | #18 |
Rock Crawler Join Date: Jul 2015 Location: McKinney, TX
Posts: 509
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
I'm in.
|
08-17-2017, 10:58 AM | #19 |
Rock Crawler Join Date: Mar 2016 Location: HB
Posts: 946
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
Sign me up
|
08-17-2017, 11:07 AM | #20 |
RCC Addict Join Date: Sep 2007 Location: Hallsville, Tx
Posts: 1,820
| Re: *Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovat
I almost in.
|
Tags |
crawler innovations, deuces wild, double deuce, giveaway, lil nova |
*Public Giveaway - 5mm Extended & Lightened AX/SCX Trans Outputs -Crawler Innovations - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
*Public Giveaway - C.I. Cell Block - * 3 Winners to be Chosen* Crawler Innovations | Nova's Ark | Chit Chat | 507 | 09-17-2017 04:26 PM |
Crawler Innovations Extended tran outputs | GravelDuster | Axial Wraith | 8 | 09-23-2012 11:56 AM |
| |