RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   General Crawlers (http://www.rccrawler.com/forum/general-crawlers/)
-   -   Overdrive T case? (http://www.rccrawler.com/forum/general-crawlers/595872-overdrive-t-case.html)

TrailDawg362 02-25-2018 05:40 PM

Overdrive T case?
 
I'm looking for a stand alone transfer case with an overdrive front output, any suggestions? Thanks in advance.

Brake Weight 02-25-2018 06:09 PM

Re: Overdrive T case?
 
RC4WD has one.

TrailDawg362 02-25-2018 06:23 PM

Re: Overdrive T case?
 
Quote:

Originally Posted by Brake Weight (Post 5804915)
RC4WD has one.

Which one? The Hammer T case has 1.47:1 reduction, but to both outputs from what I can tell.

Highmark 02-25-2018 08:29 PM

Re: Overdrive T case?
 
If you run the front driveshaft off what would normally be the input it will overdrive the front.

TrailDawg362 02-25-2018 08:52 PM

Re: Overdrive T case?
 
I wondered about doing that. 1.47 wouldn't be too excessive?

Johan_Eriksson 03-09-2018 02:24 PM

Re: Overdrive T case?
 
Toyzuki will be releasing one soon. All delrin.


Skickat från min iPhone med Tapatalk

distinctive pd 03-09-2018 03:04 PM

Re: Overdrive T case?
 
Quote:

Originally Posted by TrailDawg362 (Post 5804972)
I wondered about doing that. 1.47 wouldn't be too excessive?



I run my SCX10.2 axles with the Hammer flipped around and its perfect!!!"thumbsup"

VMGontheRocks 03-09-2018 04:17 PM

Re: Overdrive T case?
 
Hammer case with flipped inputs or the new Toyzuki case.

Dezertdirt 03-10-2018 12:34 PM

Re: Overdrive T case?
 
Dlux has one called the cheeze berger.
Dlux Fab
Ps. If someone says that it is only transmission they didn't click the link and read.

TrailDawg362 03-10-2018 01:59 PM

Re: Overdrive T case?
 
1 Attachment(s)
Thanks for the feedback, everyone! I decided to go with the Hammer T-case for ease of installation. It's installed in my new Demon SG4C to combat all the torque twist and push. Indoor testing looks like it'll work great.

hillbillyrc 03-10-2018 02:18 PM

Re: Overdrive T case?
 
There are a lot of things to do to run dlux trans as a transfer case. You need a front axle that can be flipped cause of an extra gear in it the output turns in the opposite direction. Its just not a practical option for most people and with a $110 price tag for the transfer case version. Idk there are other option that will work that are cheaper.

daveflave1275 06-13-2019 10:43 AM

Re: Overdrive T case?
 
Quote:

Originally Posted by TrailDawg362 (Post 5809810)
Thanks for the feedback, everyone! I decided to go with the Hammer T-case for ease of installation. It's installed in my new Demon SG4C to combat all the torque twist and push. Indoor testing looks like it'll work great.

I know this is and old post but Im looking at the Cross RC kit myself. Was this transfer case a direct fit with no modification? Would you say its more durable than the Cross RC unit?

WHITE-TRASH 06-13-2019 11:45 AM

Re: Overdrive T case?
 
Quote:

Originally Posted by daveflave1275 (Post 5942817)
I know this is and old post but Im looking at the Cross RC kit myself. Was this transfer case a direct fit with no modification? Would you say its more durable than the Cross RC unit?

Don't do it. If you want to actually be able to climb anything you'll be sorry you picked a cross rig. The geometry is absolutely abysmal and the shocks are trash. Pretty much everything about it makes it fine for display but garbage to drive.

Tinyfarts 01-30-2021 01:39 AM

Re: Overdrive T case?
 
Quote:

Originally Posted by daveflave1275 (Post 5942817)
I know this is and old post but Im looking at the Cross RC kit myself. Was this transfer case a direct fit with no modification? Would you say its more durable than the Cross RC unit?

did you get a cross? I did

Tinyfarts 01-30-2021 01:39 AM

Re: Overdrive T case?
 
Quote:

Originally Posted by TrailDawg362 (Post 5809810)
Thanks for the feedback, everyone! I decided to go with the Hammer T-case for ease of installation. It's installed in my new Demon SG4C to combat all the torque twist and push. Indoor testing looks like it'll work great.

what did this do for you ?
is it worth the $$?


All times are GMT -6. The time now is 11:36 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com