Link needed for 360mm wheelbase
 

Hey guys I’m currently working on a build that has a 360mm wheelbase that is scx10ii based. Now the front end uses all of the stock links. Meaning the wheel base stretch is entirely in the rear.

I am having trouble measuring the length that I’m going to need so that I can go ahead and order the required size from vanquish or another vendor. Does anybody know how long of a link that I will need for the rear uppers and lowers?


Sent from my iPhone using Tapatalk

Re: Link needed for 360mm wheelbase
 

Easy answer is 47mm longer than stock, the question then as always is how long is stock.

Can easily measure the stock eye-eye, add 47mm & then work out from the table on the VP links web page
RC Accessories - Titanium Links - Vanquish Products

Link needed for 360mm wheelbase
 

Thanks! The rear lowers are 135.5mm stock, the uppers are 127mm.

So I need 182.5mm lowers and 174mm uppers.

https://uploads.tapatalk-cdn.com/201...11893da1a2.png

I found this from vanquish as well, with the a column being the link lengths that they sell, and the c column being the eye to eye with revo rod ends.

I can use the 160mm with revo ends for the uppers but it will be 1mm too long.

After some more research, long jato rod ends are 4mm longer than revo. So I should be able to get it close enough.

Thanks!


Sent from my iPhone using Tapatalk