Anyone ever try this servo ? SPT Servo SPT5435LV-180 35KG

[charlesd]

Hi,
Has anyone ever tried these SPT servos? I'm just curious to see if the torque is exaggerated or if it's a half decent servo.



https://www.banggood.com/SPT-Servo-SPT5435LV-180-35KG-Large-Torque-Metal-Gear-Digital-Servo-For-RC-Robot-Arm-RC-Car-p-1577509.html?gmcCountry=CA¤cy=CAD&createTmp=1&utm_source=googleshopping&utm_medium=cpc_bgs&utm_content=yixuan&utm_campaign=ssc-ca-all-0924&gclid=EAIaIQobChMItPqQlaP15wIVDl8NCh1RYADQEAQYAiAB EgKVNvD_BwE&cur_warehouse=CN


Brand: SPT
Product: SPT5435LV-180 32KG 180°Digital Servo
Dead Band: 4μs
Neutral Position:1500μs/330Hz
Motor: Core Motor
Remote Control Angle: 90°
500-2500us Angle:180°/PWM
Voltage Range: 4.8V-6.0V(BEC≥3A)
Operating Speed(4.8V): 0.16''/60°
Operating Speed(6.0V): 0.14''/60°
Stall Torque(4.8V): 29 kg.cm
Stall Torque(6.0V): 35 kg.cm
Dimensions: 40.5*20*40mm
Weight: About 200g
Connector Wire Length: JR 260 mm
Bearing: 2BB
Application: For RC Car, RC Robot Arm

Package:
1* SPT SPT5435LV-180 32KG 180°Digital Servo
1* Servo Arm Set

[Rockin140]

I have no experience w/ that servo, but these might help...



https://www.youtube.com/watch?v=hv4t_-8QAkM


https://www.youtube.com/watch?v=yhcCDPBdjyE

[Bob_in az]

I use those SPT 35kg servos. They've been great for me. I run them on 7.4v. Quiet, fast & powerful. Cheap enough to keep a spare or two on hand just in case.

[charlesd]

Thanks,
That's what I thought. I'll try them out.

[nzrc]

Would be interested to hear how it goes. I love a cheap servo!

[crawlinwithacat]

Originally Posted by nzrc

Would be interested to hear how it goes. I love a cheap servo!

x2

[mass-hole]

I have one of their 32 kg servos in my Rock Rey and its held up just fine so far

[nzrc]

Ordered one of these to try out since they're so cheap. I suspect they're the same as the Zoskay\Annimos\Hexfly ones and the 35Kg is really 20Kg

[themountain]

Ordered two of the 12kg servos directly at SPT...twice the shipping was cancelled without further notice ...refund needs forever..not happy and I will look somewhere else.

[themountain]

Ordered two times the 12kg servos directly at SPT...twice the shipping was cancelled without further notice ...refund needs forever..not happy and I will look somewhere else.

[splyn]

Originally Posted by themountain

Ordered two times the 12kg servos directly at SPT...twice the shipping was cancelled without further notice ...refund needs forever..not happy and I will look somewhere else.

thats not what i want to hear. i ve been having problems finding qulaity servos at reasonable prices in stock. all the favorites are always sold out!!

[themountain]

Originally Posted by splyn

thats not what i want to hear.

Not my problem .Nobody wants to hear customer service fu..ups
If you want to have a quality servo just look over in RPP...they will send it out tomorrow.
https://www.rpphobby.com/product_p/savsc0252mg.htm

[Ninomaniac]

I have two of these... I doubt they make 20kg, nowhere near 35kg for sure. And the one in my TRX4 gets weaker and slower with runtime, after half an hour of crawling it's almost useless. I also have one in an EX Real, not sure if that one acts the same, I'll have to check.

Anyway, not better than your standard red chinese 20kg servos, possibly worse (might be a dud, the one I'm having trouble with).

Also, VERY not waterproof. No rubbers anywhere, take your truck for a little swim and it'll fill up with water

[King Dork]

My favorite cheap servo,
https://www.ebay.com/itm/DS3225-25kg...EAAOSwYxRgDyO8
Very quiet and haven’t broken one yet. I have plenty of “not cheap, aka, Holmes, etc” servos in some of my rigs, but I have no problem with this $30 fella.

[themountain]

Originally Posted by King Dork

.... but I have no problem with this $30 fella.

If you paid 30bucks for that you got robbed!

https://www.aliexpress.com/item/1943...archweb201603_

[Kingmeow]

Yeah but with Aliexperss, you have to wait forever for shipping from China. You can get the same servo on Amazon (with Prime if you have it) for $20.

[King Dork]

Originally Posted by themountain

If you paid 30bucks for that you got robbed!

https://www.aliexpress.com/item/1943...archweb201603_

Dang it! I just got another one to put in my Cross KR4C. But I also got another Holmes SHV500V3 and a Send It RC Platinum HV626 on the way to try out also. Anyway, I know it’s hard to find products that aren’t made in a Wang Chung China, but I prefer to not have anything shipped direct from China if I can avoid it.

[durok]

Originally Posted by King Dork

Dang it! I just got another one to put in my Cross KR4C. But I also got another Holmes SHV500V3 and a Send It RC Platinum HV626 on the way to try out also. Anyway, I know it’s hard to find products that aren’t made in a Wang Chung China, but I prefer to not have anything shipped direct from China if I can avoid it.

"Looking for a high toque servo. The new hv626 is the answer to that. working off the successful hv 458. We have came up with a super torque servo up to 626 oz. at a blazing speed of .085. Hv 626 is sure to meet any demand you through at it. Standard 25 tooth spline and expect the same reliability of the hv458 ."

The above text in quotation marks is a direct cut and paste from their website, full of spelling and punctuation errors.

Based on the lack of attention to detail there, I personally wouldn't have high hopes for that product...

[themountain]

Originally Posted by King Dork

... but I prefer to not have anything shipped direct from China if I can avoid it.

Thats kinda impossible in our hobby ...one way or the other .

[King Dork]

Originally Posted by durok

"Looking for a high toque servo. The new hv626 is the answer to that. working off the successful hv 458. We have came up with a super torque servo up to 626 oz. at a blazing speed of .085. Hv 626 is sure to meet any demand you through at it. Standard 25 tooth spline and expect the same reliability of the hv458 ."

The above text in quotation marks is a direct cut and paste from their website, full of spelling and punctuation errors.

Based on the lack of attention to detail there, I personally wouldn't have high hopes for that product...

Like I said, I’m willing to give it a shot for the price after discount. If it bites the weenie I’m a big enough boy to lick my wounds and move on.