Nomenclature
 

So if you piece together a crawler with parts from many different sources (but not scale) what category would it fit into in this forum? Probably this one?

Re: Nomenclature
 

Makes sense as a general crawler. I built one from the extra parts I had from my trx4, scx10 clone, and 3d printed parts.

Sent from my LE2125 using Tapatalk
https://uploads.tapatalk-cdn.com/202...95ff2ef79a.jpghttps://uploads.tapatalk-cdn.com/202...eb8be65250.jpg

Re: Nomenclature
 

What size wheels are on it?

Re: Nomenclature
 

It has 2.2's.

Re: Nomenclature
 

There you go. 2.2 section. Aka, the ryft section. Lol

Re: Nomenclature
 

If it were me I would have stuck it in the 2.2 section

Re: Nomenclature
 

56 57 58 59 Automorcbile. lol

Re: Nomenclature
 

OK - 2.2 though it isn't scale or a Ryft but I guess that's the best fit.

Re: Nomenclature
 

The 2.2 section is not really a Ryft Section.

The Ryft is the latest 2.2 scale bouncer from Axial, that happens to have 2.2 tires, and no sub section. Thats where the Ryft builds end up.


If you have chassis rails and center transmission, 2.2 tires the 2.2 scale section is going to be the spot for you. If you are running MOA or a Sporty comp rig (TVP chassis) Usually the axle type is where it gets classified.

This is a big forum. So dont worry too much and have fun

Re: Nomenclature
 

Sorry - not real clear. I'm trying to do an MOA build on a Dlux Mercenary chassis with Bully II axles and 2.2 wheels. So what would be the appropriate place for me to ask questions? I think I'm a bit over my head at this point.

Re: Nomenclature
 

There are several BullyII builds here

RCCrawler Brand Specific Tech - RC4WD Bully at RCCrawler.com

Re: Nomenclature
 

OK thanks - so I'm a Bully II