RCCrawler Forums

hitman46mod · 12-24-2007, 06:26 AM

I named it this afternoon. The Hotness will be a one of a kind.

3/16" tubing for main cage 1/8" for detail.

Base: High lift axles.

Trans: R2D, shift servo a Futaba s3003.

Steering: JR 8711 for steering.

Motor: 75t Integy.

ESC and power management: Mamba Maxx, CC BEC @ 6v

Power: 7.2 NiMH, 3s lipos eventually.

rcjeepbuilder · 12-24-2007, 09:14 AM

Very cool man, did you braze or weld? lets see some more pics!!

DISTURBIN' tha PEACE · 12-24-2007, 09:22 AM

Nice start.

The_Sickness

hitman46mod · 12-24-2007, 10:01 AM

I Mig welded it, I have alot of detail left to do. All the little brace tubing.

I'm building a scale 2.2 version of this. Linky --> http://www.4wheelers.com/photos/proj...ho/rancho.html

hitman46mod · 12-25-2007, 04:46 AM

Well, I have to stop with the detail. Till I get the guts installed and find out what does and does not work. But for now heres the plan. I want an R2D. I'm thinking of going with the Ultimate 2.2 comp combo from Holmes Hobbies.
I have a Futaba 2 channel collecting dust I will use that as radio gear for now. I will most likely run a JR8711 up front just cause they rock. And I am split between the VF stalkers or a more scale looking RC4WD beadlock.

SpyderMonkee · 12-26-2007, 04:51 PM

Run the VF stalkers

. Forget any other beadlock ever existed, Billet Works is the only way to roll. You will not be disapointed. Nice tube work, I'm keepin' an eye on this build.

hitman46mod · 12-26-2007, 11:22 PM

I did for see an issue with side hilling. At 9 1/8 inches track width, it seemed tippy. So I put on my RC4WD beadlocks and blam. It really set it off. And it is still a hair under 10" track width, and that is with the mud slingers on them. I think a nice set of losi's or moab's will do.

Oh, yea The Hotness has links now.

OptikCrawlR2134 · 12-27-2007, 12:38 AM

^^ Looking Gnarley! Love the Losi Claws!

crawl rookie · 12-27-2007, 02:53 AM

Quote:

Originally Posted by OptikCrawlR2134

^^ Looking Gnarley! Love the Losi Claws!

haha claws

ME LIKEY THIS THREAD MUCH VERY

Good job on the tuber, looks realy nice and nice welds too!

hitman46mod · 12-29-2007, 01:51 PM

Started mocking up the interior.

The seats I may order from Mytoy here on the board. The rest of the interior will must likely be aluminum, because I have a bunch in the garage.

And you can tack it with the MIG.

hitman46mod · 12-29-2007, 02:32 PM

WOOOT my yokes showed up today. Here are some pics of how I plan to lay in the trans.

2JSC · 12-29-2007, 03:38 PM

Quote:

Originally Posted by hitman46mod

I Mig welded it, I have alot of detail left to do. All the little brace tubing.

I'm building a scale 2.2 comp version of this. Linky --> http://www.4wheelers.com/photos/proj...ho/rancho.html

Its a nice rig to model it after. Cole and the boys at 4Wheelers know there stuff and have built a number of my favorite buggies.

hitman46mod · 12-29-2007, 04:39 PM

Yea, I figure with some suspension tuning it will make a fine comp crawler. The link setup is very neutral.

Just the way I like it.

SStone · 12-29-2007, 04:40 PM

Favorite tuber I have seen on this forum thus far.

hitman46mod · 12-29-2007, 04:51 PM

Quote:

Originally Posted by SStone

Favorite tuber I have seen on this forum thus far.

Thanks man. I have to give credit to SlinkySam, his tiny build gave me the inspiration to do this build.

Oh, mocked up some body panels.

hitman46mod · 12-30-2007, 09:07 AM

Battery / trans layout.

I think I will use velcro on the inside of the belly pan to hold the cells in place. Or, I could get retarded and make shelves for them to be ziptied to. I need my trans to arrive so I can get a measurement and weld in the mounting tabs. I don't trust my cardboard mockup that well.

whjdm069 · 12-30-2007, 09:51 AM

Nice build. I was wonder what you are going to use for a skid plate? I have been playing around with a tuber im building and im not sure what to use. Any suggestions appreciated.

hitman46mod · 12-30-2007, 11:02 AM

Funny you ask that.

Aluminum, the zip ties are for pics. I need to go get mounting hardware. I'm thinking 4-40 thread stainless socket head cap screws. Or maybe button head if I can get them in stainless. The body panels will be silver and the cage like a med blue. Cause, I can get all kinds of parts shocks, beadlock rings, and rims in blue or silver.

Slowkrawl · 12-30-2007, 08:20 PM

If I were you, I'd use something other than aluminum as a skid plate. Aluminum is a very sticky metal, and might hang your truck up on the rocks. I would say use something hard like thin mild steel.

hitman46mod · 12-31-2007, 07:54 AM

Quote:

Originally Posted by Slowkrawl

If I were you, I'd use something other than aluminum as a skid plate. Aluminum is a very sticky metal, and might hang your truck up on the rocks. I would say use something hard like thin mild steel.

I thought of that as well, I also have some thin gauge sheet metal some where in my garage. However most of the stuff we crawl on is smooth. Well, if it becomes a problem it will take longer to find sheet metal then it will to bend up a new belly pan.

12-24-2007, 06:26 AM	#1
hitman46mod RCC Addict Join Date: Sep 2007 Location: Westland, MI Posts: 1,508	The Hotness I named it this afternoon. The Hotness will be a one of a kind. 3/16" tubing for main cage 1/8" for detail. Base: High lift axles. Trans: R2D, shift servo a Futaba s3003. Steering: JR 8711 for steering. Motor: 75t Integy. ESC and power management: Mamba Maxx, CC BEC @ 6v Power: 7.2 NiMH, 3s lipos eventually. Attached Images Last edited by hitman46mod; 11-30-2011 at 05:33 PM.

12-24-2007, 10:01 AM	#4
hitman46mod RCC Addict Join Date: Sep 2007 Location: Westland, MI Posts: 1,508	I Mig welded it, I have alot of detail left to do. All the little brace tubing. I'm building a scale 2.2 version of this. Linky --> http://www.4wheelers.com/photos/proj...ho/rancho.html Last edited by hitman46mod; 10-31-2008 at 09:11 PM.

12-25-2007, 04:46 AM	#5
hitman46mod RCC Addict Join Date: Sep 2007 Location: Westland, MI Posts: 1,508	Well, I have to stop with the detail. Till I get the guts installed and find out what does and does not work. But for now heres the plan. I want an R2D. I'm thinking of going with the Ultimate 2.2 comp combo from Holmes Hobbies. I have a Futaba 2 channel collecting dust I will use that as radio gear for now. I will most likely run a JR8711 up front just cause they rock. And I am split between the VF stalkers or a more scale looking RC4WD beadlock. Attached Images Last edited by hitman46mod; 10-31-2008 at 09:12 PM.

12-26-2007, 04:51 PM	#6
SpyderMonkee Quarry Creeper Join Date: May 2007 Location: Tunin' Tires Posts: 239	Run the VF stalkers. Forget any other beadlock ever existed, Billet Works is the only way to roll. You will not be disapointed. Nice tube work, I'm keepin' an eye on this build.

12-26-2007, 11:22 PM	#7
hitman46mod RCC Addict Join Date: Sep 2007 Location: Westland, MI Posts: 1,508	I did for see an issue with side hilling. At 9 1/8 inches track width, it seemed tippy. So I put on my RC4WD beadlocks and blam. It really set it off. And it is still a hair under 10" track width, and that is with the mud slingers on them. I think a nice set of losi's or moab's will do. Oh, yea The Hotness has links now. Attached Images Last edited by hitman46mod; 12-26-2007 at 11:26 PM.

12-24-2007, 09:14 AM	#2
rcjeepbuilder I wanna be Dave Join Date: Apr 2007 Location: clarksburg Posts: 2,009	Very cool man, did you braze or weld? lets see some more pics!!

12-24-2007, 09:22 AM	#3
DISTURBIN' tha PEACE I wanna be Dave Join Date: Jun 2005 Location: On the G-Train!!!!! Posts: 6,081	Nice start. The_Sickness

12-27-2007, 12:38 AM	#8
OptikCrawlR2134 Newbie Join Date: Dec 2007 Location: Portkompton Posts: 21	^^ Looking Gnarley! Love the Losi Claws!

12-29-2007, 01:51 PM	#10
hitman46mod RCC Addict Join Date: Sep 2007 Location: Westland, MI Posts: 1,508	Started mocking up the interior. The seats I may order from Mytoy here on the board. The rest of the interior will must likely be aluminum, because I have a bunch in the garage. And you can tack it with the MIG. Attached Images Last edited by hitman46mod; 12-29-2007 at 08:53 PM.

12-29-2007, 02:32 PM	#11
hitman46mod RCC Addict Join Date: Sep 2007 Location: Westland, MI Posts: 1,508	WOOOT my yokes showed up today. Here are some pics of how I plan to lay in the trans. Attached Images

12-29-2007, 04:39 PM	#13
hitman46mod RCC Addict Join Date: Sep 2007 Location: Westland, MI Posts: 1,508	Yea, I figure with some suspension tuning it will make a fine comp crawler. The link setup is very neutral. Just the way I like it.

12-29-2007, 04:40 PM	#14
SStone Quarry Creeper Join Date: Nov 2007 Location: WNC Posts: 456	Favorite tuber I have seen on this forum thus far.

12-30-2007, 09:07 AM	#16
hitman46mod RCC Addict Join Date: Sep 2007 Location: Westland, MI Posts: 1,508	Battery / trans layout. I think I will use velcro on the inside of the belly pan to hold the cells in place. Or, I could get retarded and make shelves for them to be ziptied to. I need my trans to arrive so I can get a measurement and weld in the mounting tabs. I don't trust my cardboard mockup that well. Attached Images Last edited by hitman46mod; 12-30-2007 at 09:13 AM.

12-30-2007, 09:51 AM	#17
whjdm069 Newbie Join Date: Sep 2007 Location: portland Posts: 45	Nice build. I was wonder what you are going to use for a skid plate? I have been playing around with a tuber im building and im not sure what to use. Any suggestions appreciated.

12-30-2007, 11:02 AM	#18
hitman46mod RCC Addict Join Date: Sep 2007 Location: Westland, MI Posts: 1,508	Funny you ask that. Aluminum, the zip ties are for pics. I need to go get mounting hardware. I'm thinking 4-40 thread stainless socket head cap screws. Or maybe button head if I can get them in stainless. The body panels will be silver and the cage like a med blue. Cause, I can get all kinds of parts shocks, beadlock rings, and rims in blue or silver. Attached Images

Sponsored Links

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/general-crawlers/97416-hotness.html
Posted By	For	Type	Date
Run2jeepns Bully Build - Page 4 - RC4WD Forums	This thread	Refback	02-22-2013 10:07 AM

12-30-2007, 08:20 PM	#19
Slowkrawl Quarry Creeper Join Date: Nov 2007 Location: Alberta canada Posts: 386	If I were you, I'd use something other than aluminum as a skid plate. Aluminum is a very sticky metal, and might hang your truck up on the rocks. I would say use something hard like thin mild steel.

RCCrawler Forums

Thread: The Hotness