| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
03-19-2010, 08:37 PM
| #1 |
| Pebble Pounder Join Date: Feb 2008 Location: Maple Ridge, BC
Posts: 113
|  What motor/spur/pinions are on your trail rig?
What are you guys running for motors, spur and pinion gears in your trail rigs? Just want to see what the majority are using. I'm running a Honcho with stock spur and pinion along with a 35 turn with a 7-cell, and I'm quite happy with the torque and wheelspeed. |
|  |
| Sponsored Links | |
| | |
|
03-19-2010, 08:43 PM
| #2 |
| Quarry Creeper Join Date: Jan 2009 Location: Bay City
Posts: 365
| gear
I am running the stock spur gear and an 18 tooth pinion. Needed more wheel speed for where I crawl. Almost forgot stock 35 turn motor and 2 cell lipo.
Last edited by arcticjeff; 03-19-2010 at 08:45 PM. Reason: left something out |
|
| |
|
03-19-2010, 10:13 PM
| #3 |
| Quarry Creeper  Join Date: Nov 2006 Location: out in boonies!!
Posts: 349
|
Scx10/stock spur/18t/35t motor/2s-3s lipos.
|
|
| |
|
03-19-2010, 10:26 PM
| #4 |
| Newbie Join Date: Jan 2010 Location: At Work
Posts: 27
|
20T pinion/85T spur, 55T motor/3600mah 6cell trinity battery  |
|
| |
|
03-22-2010, 07:10 PM
| #5 |
| Quarry Creeper Join Date: Apr 2009 Location: Indianapolis Indiana
Posts: 346
|
well, im running a 45t integy with 16t/ whatever cc-01s spur is. Then for battery im running a 6 cell nimh im im trailing and not really gonna pay attention to what im doing. Or ill run my 2s lipo if im crawling
|
|
| |
|
03-23-2010, 10:03 AM
| #6 |
| Quarry Creeper Join Date: Oct 2007 Location: Ft. Wright, KY
Posts: 435
|
SCX-10, stock spur, 23t pinion, sidewinder, holmes 35t, 3s. Great low speed and this thing flat out gets-it!!  |
|
| |
|
03-24-2010, 04:53 AM
| #7 |
| Quarry Creeper Join Date: Dec 2008 Location: Australia
Posts: 239
|
ax10 based 20t pinion, stock spur, 35t motor 2s-3s lipo perfect for the rocks with the 2s, but the 3s is nice for trails |
|
| |
|
03-24-2010, 10:51 AM
| #8 |
| Pebble Pounder Join Date: Apr 2009 Location: chino
Posts: 156
|
i dont know why ppl like running big pinions for a scaler i run 14/87 on a 45-55t motor either 2s or 3s lipo. 3s for hard to get traction trails usually just a 2s does fine but with the small 14pinion for good torque and control
|
|
| |
|
03-24-2010, 10:57 AM
| #9 |
| Newbie Join Date: Jul 2008 Location: Milford
Posts: 13
|
I'm running a Tekin 35T and a 17T pinion on a R2 trans It's trickie to get in but it has mud clearing wheel speed. with plenty of low end.
|
|
| |
|
03-24-2010, 01:11 PM
| #10 |
| Quarry Creeper Join Date: Dec 2009 Location: Oregon
Posts: 232
|
SCX10 87spur 20t pinion 35t motor 2s. Good wheel speed and I can still crawl.
|
|
| |
|
03-24-2010, 06:21 PM
| #11 |
| Rock Stacker Join Date: Jan 2010 Location: Nanaimo BC, Canada
Posts: 93
|
Stock honcho spur, 14, 16, and 20 pinion, Axial 55t motor,7.2 nimh and 2s lipo
|
|
| |
|
| |
Linear Mode
