Go Back   RCCrawler Forums > Scale Rigs General Tech > General Scale Talk
Loading

Notices

Thread: IFS axial build

Reply
 
LinkBack Thread Tools Display Modes
Old 04-27-2012, 07:37 PM   #1
Rock Stacker
 
Join Date: May 2009
Location: Hobart, Tasmania, Australia
Posts: 52
Default IFS axial build

Hey all, i'm trying to get some info on a build i want.
i wish to use a ax10 rear end and a IFS front end, for a koh style rig.
but i'm haveing issues as to what diff center to use in the front.
i plan on running 1/16 slash hubs/driveshafts and custom arms, but i'm having issues finding a diff center that is the same ratio as axial 13/38 = 2.92:1
and with outputs i can run the slash shafts on also something that isnt to hard to mount would be good.
so can any one point me in the right direction as to find ratios/housings info? or maby some one knows?
im under the impression E-revo is very close? this might be a posibility??
red_zook is offline   Reply With Quote
Sponsored Links
Old 04-27-2012, 07:42 PM   #2
Quarry Creeper
 
Join Date: Jun 2010
Location: Ravenna/ Sault Ste. Marie
Posts: 439
Default Re: IFS axial build

check and see if you can find a front end that matches the over or under-drive gears for the axial axle. then you just get the diff and the new gears for the axle as well
scorpion ax-10 is offline   Reply With Quote
Old 04-27-2012, 08:22 PM   #3
RCC Addict
 
Join Date: Oct 2007
Location: gervais
Posts: 1,715
Default

Slash 4x4 is the closes you can get to what a stock axial axle is. It will be just slightly and I mean just slightly overdriven but that's as closes you'll get it
demonoid369 is offline   Reply With Quote
Old 04-27-2012, 10:06 PM   #4
Newbie
 
Join Date: Nov 2008
Location: Vancouver B.C.
Posts: 29
Default Re: IFS axial build

Hey Ive seen that done. Check this out it might help......http://scalebuildersguild.com/forum/...791-Bush-Buggy
Copious is offline   Reply With Quote
Old 04-28-2012, 03:10 AM   #5
Rock Stacker
 
Join Date: May 2009
Location: Hobart, Tasmania, Australia
Posts: 52
Default Re: IFS axial build

Thanks for the info guys! looks like 4x4 slash diff center and 1/16th slash hubs and shafts will work perfect. as far as i can see i can run 1.9's over the 1/16th hubs!
i will start a build thread soon. this one should be fun!
red_zook is offline   Reply With Quote
Old 04-28-2012, 03:15 AM   #6
Rock Stacker
 
Join Date: May 2009
Location: Hobart, Tasmania, Australia
Posts: 52
Default Re: IFS axial build

also Copious is there a build thread on your display pic truck?
red_zook is offline   Reply With Quote
Old 04-28-2012, 09:43 AM   #7
Newbie
 
Join Date: Nov 2008
Location: Vancouver B.C.
Posts: 29
Default Re: IFS axial build

Quote:
Originally Posted by red_zook View Post
also Copious is there a build thread on your display pic truck?
There sure is 3 posts back I put up a link. If you use HPI E-savage parts you can use the axial gear sets........ I don't have the part number but you can get from HPI the whole diff, carrier and a portion of the suspention
Copious is offline   Reply With Quote
Reply



IFS axial build - Similar Threads
Thread Thread Starter Forum Replies Last Post
New ifs basher/foff rig build lagz2point0 2.2 Scale Rigs 8 02-17-2012 02:33 AM
Street's t4r build(going IFS) StreetKill831 Losi Micro-Rock Crawler 95 02-08-2012 08:53 PM
Slash 4x4 IFS build parts list iflylolo General Scale Talk 11 03-08-2011 06:04 PM
1:1 Ifs tomh1426@yahoo.com Chit Chat 25 09-28-2005 12:34 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 07:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com